Skip to contentSkip to conversation

configs/pine64: bump U-Boot version to 2024.07

PATCH In review Mattia Narducci 2 participants 5 messages Sep 1, 2024 – Sep 4, 2024

lore
Share & tools
lore
#2 lore raw

PATCH 3/3 configs/pine64: bump Linux to version 6.6.48

In reply to Mattia Narducci

Bump Linux to the latest LTS version 6.6.48 and increase rootfs size to fit kernel modules.

---
 configs/pine64_defconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
configs/pine64_defconfig +4 -3
index fb3a468f2d..1a3d1ab6fe 100644
@@ -2,8 +2,8 @@ BR2_aarch64=y
 BR2_cortex_a53=y
 BR2_ARM_FPU_VFPV4=y
 
-# Linux headers same as kernel, a 5.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
+# Linux headers same as kernel, a 6.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
 
 # Firmware
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
@@ -31,7 +31,7 @@ BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/pine64/pine64/boot.cmd"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.48"
 BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-pine64"
@@ -41,6 +41,7 @@ BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_TARGET_GENERIC_ISSUE="Welcome to PINE64"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
Signature · 9 lines
2.45.2




_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#1 lore raw

PATCH 2/3 configs/pine64: bump TF-A version to 2.10.5

In reply to Mattia Narducci
---
 configs/pine64_defconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
configs/pine64_defconfig +1 -2
index a6ddf6e57b..fb3a468f2d 100644
@@ -8,9 +8,8 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
 # Firmware
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.7"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="lts-v2.10.5"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_a64"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
 
 # Bootloader
 BR2_TARGET_UBOOT=y
Signature · 11 lines
2.45.2






_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#0 lore raw

PATCH 1/3 configs/pine64: bump U-Boot version to 2024.07

Update U-Boot to fix the following error when building with python-setuptools >= 69, that is, since 6b62384e3d ("package/python-setuptools: bump to version 69.0.3"):

packaging.version.InvalidVersion: Invalid version: 'u-boot-2019.01' make[5]: *** [scripts/dtc/pylibfdt/Makefile:27: scripts/dtc/pylibfdt/_libfdt.so] Error 1 make[4]: *** [scripts/Makefile.build:434: scripts/dtc/pylibfdt] Error 2 make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:434: scripts/dtc] Error 2
make[2]: *** [Makefile:508: scripts] Error 2
make[1]: *** [package/pkg-generic.mk:289: output/build/uboot-2019.01/.stamp_built] Error 2
make: *** [Makefile:83: _all] Error 2

Use SPL and U-Boot FIT image combined into u-boot-sunxi-with-spl.bin.

Do not use the optional System Control Processor (SCP) firmware pointing the SCP env variable to /dev/null.

---
 board/pine64/pine64/genimage.cfg | 12 +++---------
 configs/pine64_defconfig         |  8 ++++----
 2 files changed, 7 insertions(+), 13 deletions(-)
board/pine64/pine64/genimage.cfg +3 -9
index 06b4ed1056..3555869036 100644
@@ -14,17 +14,11 @@ image sdcard.img {
 	hdimage {
 	}
 
-	partition spl {
-		in-partition-table = "no"
-		image = "sunxi-spl.bin"
-		offset = 8K
-	}
-
 	partition u-boot {
 		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 40K
-		size = 1M # 1MB - 40KB
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8K
+		size = 1016K # 1MB - 8KB
 	}
 
 	partition boot {
configs/pine64_defconfig +4 -4
index c454114d2a..a6ddf6e57b 100644
@@ -16,15 +16,15 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="pine64_plus"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
 BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SCP=/dev/null"
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/pine64/pine64/boot.cmd"
Signature · 9 lines
2.45.2




_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#3 lore raw
Quoted 15 lines · On Sun, 01 Sep 2024 18:42:58 +0200 Mattia Narducci <[email protected]>…

Update U-Boot to fix the following error when building with python-setuptools >= 69, that is, since 6b62384e3d ("package/python-setuptools: bump to version 69.0.3"):

packaging.version.InvalidVersion: Invalid version: 'u-boot-2019.01' make[5]: *** [scripts/dtc/pylibfdt/Makefile:27: scripts/dtc/pylibfdt/_libfdt.so] Error 1 make[4]: *** [scripts/Makefile.build:434: scripts/dtc/pylibfdt] Error 2 make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:434: scripts/dtc] Error 2
make[2]: *** [Makefile:508: scripts] Error 2
make[1]: *** [package/pkg-generic.mk:289: output/build/uboot-2019.01/.stamp_built] Error 2
make: *** [Makefile:83: _all] Error 2

Use SPL and U-Boot FIT image combined into u-boot-sunxi-with-spl.bin.

Quoted 8 lines

Do not use the optional System Control Processor (SCP) firmware pointing the SCP env variable to /dev/null.

---
 board/pine64/pine64/genimage.cfg | 12 +++---------
 configs/pine64_defconfig         |  8 ++++----
 2 files changed, 7 insertions(+), 13 deletions(-)

Series applied to next. However, if possible I'd like you to test/send a follow-up patch.

board/pine64/pine64/genimage.cfg image sdcard.img { · line 21

Quoted 8 lines
board/pine64/pine64/genimage.cfg +3 -3
 	partition u-boot {
 		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 40K
-		size = 1M # 1MB - 40KB
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8K
+		size = 1016K # 1MB - 8KB

Here this "size" field is a bit silly. We don't really care that the size is 1016KB. What we care is that the offset is 8 KB, and that the next partition is aligned on a good boundary.

So could you test something like:

https://patchwork.ozlabs.org/project/buildroot/patch/[email protected]/

instead?

Thanks!

Thomas

Signature · 7 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#4 lore raw
Quoted 15 lines · On Tue, 03 Sep 2024 21:53:08 CEST Thomas Petazzoni wrote:

board/pine64/pine64/genimage.cfg image sdcard.img { · line 21

Quoted 8 lines · On Sun, 01 Sep 2024 18:42:58 +0200 Mattia Narducci <[email protected]>…
board/pine64/pine64/genimage.cfg +3 -3
 	partition u-boot {
 		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 40K
-		size = 1M # 1MB - 40KB
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8K
+		size = 1016K # 1MB - 8KB

Here this "size" field is a bit silly. We don't really care that the size is 1016KB. What we care is that the offset is 8 KB, and that the next partition is aligned on a good boundary.

Quoted 5 lines

So could you test something like:

https://patchwork.ozlabs.org/project/buildroot/patch/[email protected]/

instead?

Sure! I have seen this approach used for other boards and thought it was fine, but the offset is definitely clearer.

Signature · 7 lines
Mattia


_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot