Skip to contentSkip to conversation

bug in 2.6.16-mm1 - snd-ad1816a is not being loaded

DISCUSSION Uwe Bugla 2 participants 3 messages Mar 24, 2006 – Mar 27, 2006

lore
Share & tools
lore

Uwe Bugla

author
#0 lore raw

Hi folks,
I've tried Bjorn Hellgaas' patch which is included in 2.6.16-mm1. Thanks for his attempts. But the problem still persists:
snd-ad1816a still refuses to load and dmesg still talks about a PnP configuration error. If you need additional information, please tell me how to produce it. 2.6.16 without mm1 works fine so far.

Ciao
Uwe
P. S.: In the first lines of dmesg the card is being recognized and the card ID is being printed out to the console. But as soon as it goes to loading the driver module the whole thing is broken and the module is not being loaded, while dmesg prints out a PnP configuration error.

Signature · 2 lines
Bis zu 70% Ihrer Onlinekosten sparen: GMX SmartSurfer!
Kostenlos downloaden: http://www.gmx.net/de/go/smartsurfer
#1 lore raw
Quoted 7 lines · Uwe Bugla

Hi folks,
I've tried Bjorn Hellgaas' patch which is included in 2.6.16-mm1. Thanks for his attempts. But the problem still persists:
snd-ad1816a still refuses to load and dmesg still talks about a PnP configuration error. If you need additional information, please tell me how to produce it. 2.6.16 without mm1 works fine so far.

Quoted 6 lines

Ciao
Uwe
P. S.: In the first lines of dmesg the card is being recognized and the card ID is being printed out to the console. But as soon as it goes to loading the driver module the whole thing is broken and the module is not being loaded, while dmesg prints out a PnP configuration error.

Could you please open a report at http://bugzilla.kernel.org and attach the complete dmesg logs from 2.6.16 and 2.6.16-mm1?

Thanks!

Bjorn

#2 lore raw
In reply to Uwe Bugla
Quoted 7 lines · Uwe Bugla

Hi folks,
I've tried Bjorn Hellgaas' patch which is included in 2.6.16-mm1. Thanks for his attempts. But the problem still persists:
snd-ad1816a still refuses to load and dmesg still talks about a PnP configuration error. If you need additional information, please tell me how to produce it. 2.6.16 without mm1 works fine so far.

Quoted 6 lines

Ciao
Uwe
P. S.: In the first lines of dmesg the card is being recognized and the card ID is being printed out to the console. But as soon as it goes to loading the driver module the whole thing is broken and the module is not being loaded, while dmesg prints out a PnP configuration error.

For anybody else interested, I opened a kernel bugzilla for this, and Uwe provided complete dmesg logs, which I attached there:

    http://bugzilla.kernel.org/show_bug.cgi?id=6292