No Partition in Flash Memoery under MTD
Greetings,
i am using ELDK 2.6.26 distribution on MPC8349emds, arch = powerpc, cross_compile = ppc_6xx-
i've tried with uImage + FDT blob .dtb + uRamdisk
and i've added flash mapping in .dts as follow:
physmap-flash at 0xfc000000 {
compatible = "amd,am29lv128ml", "cfi-flash";
reg = <0xfc000000 0x04000000>;
bank-width = <2>;
device-width = <1>;
#address-cells = <1>;
#size-cells = <1>;
uboot at 0 {
label = "u-boot";
reg = <0 0x000040000>;
};
uImage at 0x00080000 {
label = "uImage";
reg = <0x00080000 0x00100000>;
};
uRamdisk at 0x00180000 {
label = "uRamdisk";
reg = <0x00180000 0x00200000>;
};
mds at 0x00380000 {
label = "MDS Device Tree";
reg = <0x00380000 0x00800000>;
};
};when i boot up the kernel on the board, i tried
# cat /proc/mtd dev: size erasesize name mtd0: 04000000 00020000 "physmap-flash.0"
and
# df Filesystem 1k-blocks Used Available Use% Mounted on /dev/ram0 5040 3756 1284 75% /
it does not shows flash device with df, and no partition under /proc/mtd, can anybody help?
in advance, thank you.
Signature · 2 lines
View this message in context: http://www.nabble.com/No-Partition-in-Flash-Memoery-under-MTD-tp19322708p19322708.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Hello,
Quoted 41 lines · FlyingWoWings
Greetings,
i am using ELDK 2.6.26 distribution on MPC8349emds, arch = powerpc,cross_compile= ppc_6xx-i've tried with uImage + FDT blob .dtb + uRamdisk
and i've added flash mapping in .dts as follow:physmap-flash at 0xfc000000 { compatible = "amd,am29lv128ml", "cfi-flash"; reg = <0xfc000000 0x04000000>; bank-width = <2>; device-width = <1>; #address-cells = <1>; #size-cells = <1>; uboot at 0 { label = "u-boot"; reg = <0 0x000040000>; }; uImage at 0x00080000 { label = "uImage"; reg = <0x00080000 0x00100000>; }; uRamdisk at 0x00180000 { label = "uRamdisk"; reg = <0x00180000 0x00200000>; }; mds at 0x00380000 { label = "MDS Device Tree"; reg = <0x00380000 0x00800000>; }; };when i boot up the kernel on the board, i tried
# cat /proc/mtd dev: size erasesize name mtd0: 04000000 00020000 "physmap-flash.0"and
Quoted 9 lines
# df Filesystem 1k-blocks Used Available Use% Mounted on /dev/ram0 5040 3756 1284 75% /it does not shows flash device with df, and no partition under
/proc/mtd, can anybody help?in advance, thank you.
Is CONFIG_MTD_OF_PARTS turned on in your .config file? I think this is the feature that allows the kernel to get mtd partition information from the dtb blob.