Skip to contentSkip to conversation

send_sigqueue problem..

DISCUSSION [email protected] 2 participants 2 messages Nov 2, 2005 – Nov 3, 2005

lore
Share & tools
lore
#0 lore raw

Hi guys,

i am trying to use the linux signaling to signal a user process from the kernel..
i require a reliable(without any signal loss) and fast signaling mechanism.
i tried to use the send_sigqueue to send the signals...here what i did

1) creted the sigqueue structure using the sigqueue_alloc()..
2) called the send_sigqueue() function...
it worked fine for some time(around 1000 sig) but after that sigqueue_alloc failing..may be becuse of not enough memory available to allocate sigqueue..
i got few question about this..

1) does sigqueue structure need to be removed explisitly or it will be autometically cleared after the signal delivery (i did't used the sigqueue_free() becuse i dont know when the signal is deliverd). 2)there is any another way i can implement such a signaling mechanism.

i will be thankful for your help...

-prady

#1 lore raw
Quoted 7 lines · On 11/3/05, [email protected] <[email protected]> wrote:

i am trying to use the linux signaling to signal a user process from the kernel..
i require a reliable(without any signal loss) and fast signaling mechanism.
i tried to use the send_sigqueue to send the signals...here what i did

Quoted 5 lines

1) creted the sigqueue structure using the sigqueue_alloc()..
2) called the send_sigqueue() function...
it worked fine for some time(around 1000 sig) but after that sigqueue_alloc failing..may be becuse of not enough memory available to allocate sigqueue..

Its obvious that if you allocate some-thing (like through sigqueue_alloc) then you have to free that too (like through sigqueue_free)

Quoted 5 lines

i got few question about this..

1) does sigqueue structure need to be removed explisitly or it will be autometically cleared after the signal delivery (i did't used the sigqueue_free() becuse i dont know when the signal is deliverd).

yes, you have to remove the structure explicitly as you allocated it by your-self ! And I think you can call sigqueue_free just after calling send_sigqueue because the singals are delivered to the process with the wake_up call and then you can remove your sigqueue structure (I might be wrong as I am saying this by just going through the send_sigqueue function, CMIIW)

Quoted 2 lines

2)there is any another way i can implement such a signaling mechanism.

I saw one simple way in signal.c file. send_sig function which sends signal by-itself (means allocate sigqueue internally) see
http://lxr.linux.no/source/kernel/signal.c#L1249

--
Fawad Lateef