booting initramfs
Hi all!
I am trying to boot my board with initramfs file system. After loading the kernel image and initramfs onto uboot, executing bootm command gave me
errors of "bad magic number". Then I tried to append header information
using
mkimage, here's what I executed:
/tools/mkimage -A ppc -O linux -T filesystem -C gzip -n 'Initramfs root file' -d /exports/myinitramfs.cpio.gz myramfs
Image Name: Initramfs root file Created: Tue Sep 16 21:28:41 2008 Image Type: PowerPC Linux Filesystem Image (gzip compressed) Data Size: 51685255 Bytes = 50473.88 kB = 49.29 MB Load Address: 0x00000000 Entry Point: 0x00000000
When I try to boot this image, I am getting "No Linux PPC Ramdisk Image"
## Loading RAMDisk Image at 00900000 ...
Image Name: Initramfs root file Image Type: PowerPC Linux Unknown Image (gzip compressed) Data Size: 51685255 Bytes = 49.3 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
No Linux PPC Ramdisk Image
(u-boot restarts after this)
1. Where am I going wrong. Can I not boot using Initramfs, or should I create Ramdisk image only for booting the board.
2. If I need to create ramdisk using genext2fs is there any size restriction, that the file size should be
less than 8 MB?
Please let me know.
Thanks,
joy
Signature · 2 lines
View this message in context: http://www.nabble.com/booting-initramfs-tp19531737p19531737.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Dear cjjoy1980,
Quoted 6 lines · In message <[email protected]> you wrote:
I am trying to boot my board with initramfs file system. After loading the kernel image and initramfs onto uboot, executing bootm command gave me
errors of "bad magic number". Then I tried to append header information
using
mkimage, here's what I executed:
...
Quoted 2 lines
1. Where am I going wrong. Can I not boot using Initramfs, or should I create Ramdisk image only for booting the board.
Initramfs != ramdisk.
Quoted 3 lines
2. If I need to create ramdisk using genext2fs is there any size restriction, that the file size should be
less than 8 MB?
No.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Most people would like to be delivered from temptation but would like it to keep in touch." - Robert Orben