Need help getting the remote of a Nova-T USB-Stick to work
Hi all !
I just got my iBook G4 running on Debian Etch 4.0 (PPC Archtitecture!!)
Everything works fine, now im trying to get my Nova-T USB-Stick Remote to work.
I compiled the latest stable v4l-dvb-drivers, everything worked fine, and i`m able to watch tv with kaffeine and mythtv already. Now i would like to get the remote to work .. the ir-receiver shows up during boot, giving the following ouput :
"kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input7".
If i do a lsinput, the device shows up like this :
/dev/input/event7
bustype : BUS_USB
vendor : 0x2040
product : 0x7070
version : 256
name : "IR-receiver inside an USB DVB re"
phys : "usb-0001:10:1b.2-1/ir0"
bits ev : EV_SYN EV_KEY
so i`m pretty sure i am not toooo far away from the solution.
but if i press a button on the rc, it just gives me kernel messages like this :
"kernel: dib0700: Unknown remote controller key: 1D 2 0 0"
After a bit of googling, i found out, that there seems to be a solution, using a diff file, which i downloaded already, its attached to this mail.
Now i need a bit of support in using this diff-file correctly, and some infos on how to continue then..
Any help is very appreciated :)
Thx in advance, Oliver
_________________________________________________________________________
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten! Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114
linux/drivers/media/dvb/dvb-usb/dib0700_devices.c +36 -1
@@ -601,7 +601,42 @@ { 0xeb, 0x54, KEY_PREVIOUS }, { 0xeb, 0x58, KEY_RECORD }, { 0xeb, 0x5c, KEY_NEXT }, - +/* Key codes for the Haupauge NOVA USB-Stick */ + { 0x1d, 0x1f, KEY_BACK }, + { 0x1d, 0x14, KEY_UP }, + { 0x1d, 0x1c, KEY_RADIO }, + { 0x1d, 0x3b, KEY_HOME }, + { 0x1d, 0x3D, KEY_POWER }, + { 0x1d, 0x16, KEY_LEFT }, + { 0x1d, 0x25, KEY_OK }, + { 0x1d, 0x17, KEY_RIGHT }, + { 0x1d, 0x24, KEY_PREVIOUS }, + { 0x1d, 0x1E, KEY_NEXT }, + { 0x1d, 0x37, KEY_RECORD }, + { 0x1d, 0x15, KEY_DOWN }, + { 0x1d, 0x36, KEY_STOP }, + { 0x1d, 0x30, KEY_PAUSE }, + { 0x1d, 0x35, KEY_PLAY }, + { 0x1d, 0x00, KEY_0 }, + { 0x1d, 0x01, KEY_1 }, + { 0x1d, 0x02, KEY_2 }, + { 0x1d, 0x03, KEY_3 }, + { 0x1d, 0x04, KEY_4 }, + { 0x1d, 0x05, KEY_5 }, + { 0x1d, 0x06, KEY_6 }, + { 0x1d, 0x07, KEY_7 }, + { 0x1d, 0x08, KEY_8 }, + { 0x1d, 0x09, KEY_9 }, + { 0x1d, 0x32, KEY_REWIND }, + { 0x1d, 0x34, KEY_FASTFORWARD }, + { 0x1d, 0x20, KEY_CHANNELUP }, + { 0x1d, 0x21, KEY_CHANNELDOWN }, + { 0x1d, 0x10, KEY_VOLUMEUP }, + { 0x1d, 0x11, KEY_VOLUMEDOWN }, + { 0x1d, 0x0A, KEY_TEXT }, + { 0x1d, 0x0D, KEY_MENU }, + { 0x1d, 0x12, KEY_CHANNEL }, + { 0x1d, 0x0F, KEY_MUTE },/* Key codes for the Haupauge WinTV Nova-TD, copied from nova-t-usb2.c (Nova-T USB2) */ { 0x1e, 0x00, KEY_0 }, { 0x1e, 0x01, KEY_1 },
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
2008/9/26 Oliver Kleinecke <[email protected]>:
Quoted 19 lines
I compiled the latest stable v4l-dvb-drivers, everything worked fine, and i`m able to watch tv with kaffeine and mythtv already. Now i would like to get the remote to work .. the ir-receiver shows up during boot, giving the following ouput :
"kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input7".
If i do a lsinput, the device shows up like this :
/dev/input/event7
bustype :BUS_USB
vendor :0x2040
product :0x7070
version : 256
name : "IR-receiver inside an USB DVB re"
phys : "usb-0001:10:1b.2-1/ir0"
bits ev :EV_SYNEV_KEYso i`m pretty sure i am not toooo far away from the solution.
Quoted 8 lines
but if i press a button on the rc, it just gives me kernel messages like this :
"kernel: dib0700: Unknown remote controller key: 1D 2 0 0"
After a bit of googling, i found out, that there seems to be a solution, using a diff file, which i downloaded already, its attached to this mail.
Now i need a bit of support in using this diff-file correctly, and some infos on how to continue then..
That patch looks pretty straightforward. Where did it come from? Have you tried it out:
cd v4l-dvb
patch -p0 < path_to_patch_file
make
make install
reboot
See if it works...
(or you might have to do "patch -p1", depending on the patch)
If it works for you, it can be checked in so others won't have to deal with the problem in the future.
Devin
Signature · 8 lines
Devin J. Heitmueller http://www.devinheitmueller.com AIM: devinheitmueller _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb