Skip to contentSkip to conversation

SATA: Marvell 88SE6141 kernel support?

DISCUSSION [email protected] 2 participants 2 messages Mar 22, 2007

lore
Share & tools
lore
#0 lore raw

sorry about it taking so long to get back to you. I noticed it still doesn't
work after upgrading to fedora 6 and the newest kernel (at the time) so I thought I'd give your legacy driver a try (if you still have it) I'd love to have those 4 extra sata ports. Just a question with
the legacy driver would the performance take a hit? I'd be using the ports to
add more disks to raid arrays.

kernel version: 2.6.19-1.2911.6.5.fc6:
linux distro: fedora core 6 64bit
lspci -v output for marvell sata -

03:00.0 SATA controller: Marvell Technology Group Ltd. Unknown device 6141 (rev 01) (prog-if 81)

        Subsystem: ASUSTeK Computer Inc. Unknown device 81d6
        Flags: bus master, fast devsel, latency 0, IRQ 10
        I/O ports at 9c00 [size=8]
        I/O ports at 9880 [size=4]
        I/O ports at 9800 [size=64]
        I/O ports at 9480 [size=32]
        Memory at fa5ffc00 (32-bit, non-prefetchable) [size=1K]
        Expansion ROM at fa580000 [disabled] [size=256K]
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
        Capabilities: [e0] Express Legacy Endpoint IRQ 0 

Gene

#1 lore raw
Quoted 7 lines · [email protected] wrote:

sorry about it taking so long to get back to you. I noticed it still doesn't work after upgrading to fedora 6 and the newest kernel (at the time) so I thought I'd give your legacy driver a try (if you still have it) I'd love to have those 4 extra sata ports. Just a question with the legacy driver would the performance take a hit? I'd be using the ports to add more disks to raid arrays.

kernel version: 2.6.19-1.2911.6.5.fc6:
linux distro: fedora core 6 64bit
lspci -v output for marvell sata -

03:00.0 SATA controller: Marvell Technology Group Ltd. Unknown device 6141 (rev 01) (prog-if 81)

If you are only using the SATA side of things, you can probably just add the PCI ID to the driver.

Or test the patch found in -mm tree.

Jeff