Skip to contentSkip to conversation

strange problem with my oli M700

DISCUSSION Thomas Bogendoerfer 5 participants 7 messages Jan 29, 1998 – Jan 30, 1998 MIPS

lore
Share & tools
lore

Thomas Bogendoerfer

author maintainer
#0 lore raw

Hi,

I'm trying to read the firmware prom of my Olivetti M700 (Magnum 4000 clone). When access the address 0x9fc00000 (which is the KSEG0 address of the prom) the box freezes immidiately. Does anybody know why ? And how could I access the prom otherwise ?

Thomas.

Signature · 3 lines
See, you not only have to be a good coder to create a system like Linux,
you have to be a sneaky bastard too ;-)
                   [Linus Torvalds in <[email protected]>]
#1 lore raw
Quoted 4 lines · Thomas Bogendoerfer

I'm trying to read the firmware prom of my Olivetti M700 (Magnum 4000 clone). When access the address 0x9fc00000 (which is the KSEG0 address of the prom) the box freezes immidiately. Does anybody know why ? And how could I access the prom otherwise ?

Did you try uncached accesses via KSEG1? I wouldn't wonder if the used PROMs can't cope with the bursts generated for filling a cacheline.

Ralf

#2 lore raw
Quoted 7 lines · On Thu, Jan 29, 1998 at 10:17:50PM +0100, [email protected] wrote:
Quoted 4 lines

I'm trying to read the firmware prom of my Olivetti M700 (Magnum 4000 clone). When access the address 0x9fc00000 (which is the KSEG0 address of the prom) the box freezes immidiately. Does anybody know why ? And how could I access the prom otherwise ?

Did you try uncached accesses via KSEG1? I wouldn't wonder if the used PROMs can't cope with the bursts generated for filling a cacheline.

Which btw reminds me that enabling the second level cache on a Indy also makes call into the ARC firmware crash. Dunno why.

Ralf

#3 lore raw

New to group

Hello People,
Just wondering if the web page for sgi-linux is a bit out of date with the
install instructions. There's all kinds of stuff on the ftp server that isn't mentioned anywhere. I'll probably skim the news archive after this. I have an Indy. I run Linux on my pc, and am very interested in this port. What is the status of the xserver? What are the current goals of the port? How long do you
expect before the dual boot is running? I would be willing to run it and
participate as a beta tester and have subscribed to this list. If you could post an installation walkthrough or something updated for the latest changes, that would be great.
Thanks,
Jeremy Welling
UofMich Engr Student

author maintainer
#4 lore raw
In reply to [email protected]
Quoted 9 lines · On Thu, Jan 29, 1998 at 10:17:50PM +0100, [email protected] wrote:
Quoted 4 lines · Thomas Bogendoerfer

I'm trying to read the firmware prom of my Olivetti M700 (Magnum 4000 clone). When access the address 0x9fc00000 (which is the KSEG0 address of the prom) the box freezes immidiately. Does anybody know why ? And how could I access the prom otherwise ?

Did you try uncached accesses via KSEG1? I wouldn't wonder if the used PROMs can't cope with the bursts generated for filling a cacheline.

uncached access works. Thanks.

Thomas.

Signature · 3 lines
See, you not only have to be a good coder to create a system like Linux,
you have to be a sneaky bastard too ;-)
                   [Linus Torvalds in <[email protected]>]
#5 lore raw
In reply to [email protected]
Quoted 9 lines · [email protected] writes:
Quoted 4 lines · Thomas Bogendoerfer

I'm trying to read the firmware prom of my Olivetti M700 (Magnum 4000 clone). When access the address 0x9fc00000 (which is the KSEG0 address of the prom) the box freezes immidiately. Does anybody know why ? And how could I access the prom otherwise ?

Did you try uncached accesses via KSEG1? I wouldn't wonder if the used PROMs can't cope with the bursts generated for filling a cacheline.

I am pretty certain that is the case for the Magnum. That is, you
must use 0xbfc00000, not 0x9fc00000.

#6 lore raw
In reply to Thomas Bogendoerfer
Quoted 7 lines · Thomas Bogendoerfer

Hi,

I'm trying to read the firmware prom of my Olivetti M700 (Magnum 4000 clone). When access the address 0x9fc00000 (which is the KSEG0 address of the prom) the box freezes immidiately. Does anybody know why ? And how could I access the prom otherwise ?

Accesses through kseg0 generate burst reads on the CPU bus. If the memory controller doesn't support it for that region of memory, the system could hang. Since the system reset vector is in kseg1 (ie 0xbfc00000), accesses through that region have to work, or the machine wouldn't boot.

| Andrew Dyer                       <[email protected]> or <[email protected]>     |
| Sr. Design Engineer               (773) 961-1751                            |
| Midway Games, Inc.                (773) 961-1890 (fax)                      |
| 2727 W. Roscoe Ave., Chicago, IL 60618                                      |