clock/bogomips in cpuinfo
Greetings,
I just received a long-awaited CPU upgrade for my 9500.
It's the MacTell PowerJolt 400mHz/200mHz bus with 1024K cache.
It works great and on the first try with Paul M's stock 2.2.1 kernel, but a peek at /proc/cpuinfo tells me clock : 195MHZ and bogomips : 403.87.
I'm a curious of what these terms might mean in this context and if it would be possible to effectively adjust these as settings somewhere.
Otherwise I would appreciate any pointers to discussions of the dynamics of G3 upgrade configuration or terminology, if these exist.
Thank you,
Tim Carroll
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
On Wed, 17 Mar 1999, Tim Carroll wrote:
}It works great and on the first try with Paul M's stock 2.2.1 kernel, but }a peek at /proc/cpuinfo tells me clock : 195MHZ and bogomips : 403.87.
I get almost the same result with my 604e/233 MHz card in my 7500, i.e. the /proc/cpuinfo says 195 MHz, but the BogoMips says 466 (IIRC). In MacOS, the CPU and bus speeds are what they are supposed to be.
This has not affected anything I am doing, so I did not bother too much with it. But I guess this is not something peculiar to my machine or card, as I first thought ...
vinai
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]