Hi
I'd just like to introduce myself. I've liberated a 715/33 Apollo from use as a monitor stand and managed to retrieve all the pieces needed to get it as far as a boot prom prompt. It's got 56MB of RAM and a hard disc of some description. I've got it attached to the ethernet, though I have no idea whether this is working right now. I don't however have anything to boot right now - apparently this disc was used for swap when this workstations was running HP-UX in the dim distant past (you should see the dust).
I have no previous experience of the HP architecture, but I'm a dab hand at ARM assembler and I'm willing to learn. Anyway, here I am with a machine, ready to help.
Signature · 4 lines
Matthew Wilcox <[email protected]> "Windows and MacOS are products, contrived by engineers in the service of specific companies. Unix, by contrast, is not so much a product as it is a painstakingly compiled oral history of the hacker subculture." - N Stephenson
Quoted 8 lines
I'd just like to introduce myself. I've liberated a 715/33 Apollo from use as a monitor stand and managed to retrieve all the pieces needed to get it as far as a boot prom prompt. It's got 56MB of RAM and a hard disc of some description. I've got it attached to the ethernet, though I have no idea whether this is working right now. I don't however have anything to boot right now - apparently this disc was used for swap when this workstations was running HP-UX in the dim distant past (you should see the dust).
I think you have the choice to either wait til Linux is bootable or get a second hard disk and an HP-UX on it. The disks should be narrow SCSI so the second disk shouldn't really be much of a problem.
Quoted 3 lines
I have no previous experience of the HP architecture, but I'm a dab hand at ARM assembler and I'm willing to learn. Anyway, here I am with a machine, ready to help.
OK, first I propose you look at www.thepuffingroup.com/parisc and get just about everything linked from the Documentation section. What is most important to get a kernel working fast is acd.pdf (ARM), the runtime architecture document and perhaps pdc and iodc descriptions.
I think it should be theoretically possible to put the disk in a supported machine, cross-build a kernel and bootloader (oh yeah, perhaps you should fix the problems with that first ;), put it back into the PARISC aso. but just getting a version of HP-UX and a second disk seems easier to me.
Philipp Rumpf
Quoted 9 lines · Philipp Rumpf
Quoted 8 lines
I'd just like to introduce myself. I've liberated a 715/33 Apollo from use as a monitor stand and managed to retrieve all the pieces needed to get it as far as a boot prom prompt. It's got 56MB of RAM and a hard disc of some description. I've got it attached to the ethernet, though I have no idea whether this is working right now. I don't however have anything to boot right now - apparently this disc was used for swap when this workstations was running HP-UX in the dim distant past (you should see the dust).
Quoted 3 lines
I think you have the choice to either wait til Linux is bootable or get a second hard disk and an HP-UX on it. The disks should be narrow SCSI so the second disk shouldn't really be much of a problem.
Mathew can also download and try to install the PA-mklinux. I have this running on a 712/60 now. I suggest this because I don't know how accessible HP-UX bits are to the general public. HP-UX is usually distributed on CD-ROM these days.
Since the source is available for mk-linux, that would suppliment the PA architecture documentation and might provide the kind of implementation detail someone experienced in assembler could use.
grant
Quoted 17 lines
Quoted 4 lines
I have no previous experience of the HP architecture, but I'm a dab hand at ARM assembler and I'm willing to learn. Anyway, here I am with a machine, ready to help.
OK, first I propose you look at www.thepuffingroup.com/parisc and get just about everything linked from the Documentation section. What is most importan
t
to get a kernel working fast is acd.pdf (ARM), the runtime architecture docum
ent
and perhaps pdc and iodc descriptions.I think it should be theoretically possible to put the disk in a supported machine, cross-build a kernel and bootloader (oh yeah, perhaps you should fix the problems with that first ;), put it back into the PARISC aso. but just getting a version of HP-UX and a second disk seems easier to me.
Quoted 6 lines
Philipp Rumpf
---------------------------------------------------------------------------
To unsubscribe: send e-mail to [email protected] with `unsubscribe' as the subject.
Grant Grundler
Enterprise Systems Technology Lab
+1.408.447.7253
Quoted 4 lines · Grant Grundler
Mathew can also download and try to install the PA-mklinux. I have this running on a 712/60 now. I suggest this because I don't know how accessible HP-UX bits are to the general public. HP-UX is usually distributed on CD-ROM these days.
Alas, no. The 715/33 is the one machine that mklinux does not support; I looked at that about 6 months ago.
Signature · 4 lines
Matthew Wilcox <[email protected]> "Windows and MacOS are products, contrived by engineers in the service of specific companies. Unix, by contrast, is not so much a product as it is a painstakingly compiled oral history of the hacker subculture." - N Stephenson
Quoted 8 lines · Matthew Wilcox
Quoted 4 lines · Grant Grundler
Mathew can also download and try to install the PA-mklinux. I have this running on a 712/60 now. I suggest this because I don't know how accessible HP-UX bits are to the general public. HP-UX is usually distributed on CD-ROM these days.
Alas, no. The 715/33 is the one machine that mklinux does not support; I looked at that about 6 months ago.
Have you looked at OpenBSD ?
Tom
Signature · 6 lines
=============================+=========================== Tom Javen | Innotrac Diagnostics Oy email [email protected] | Finland gsm +358-40-5860532 | phone +358-2-2410025 | fax +358-2-2410024 =============================+===========================
Quoted 11 lines · Tom Javen
Quoted 8 lines · Matthew Wilcox
Quoted 4 lines · Grant Grundler
Mathew can also download and try to install the PA-mklinux. I have this running on a 712/60 now. I suggest this because I don't know how accessible HP-UX bits are to the general public. HP-UX is usually distributed on CD-ROM these days.
Alas, no. The 715/33 is the one machine that mklinux does not support; I looked at that about 6 months ago.
Have you looked at OpenBSD ?
I don't know wether he did. But I was unable to find anything beyond HP-UX to run on the HP 715/33 hardware. So I am hoping this machine will join the TUX family before the end of this year. (Not intended to push anyone but I am rather optimistic now some of the persons with intimate kernel knowledge are part of the team.)
Hugo.
Signature · 5 lines
Hugo van der Kooij; Oranje Nassaustraat 16; 3155 VJ Maasland [email protected] http://www.caiw.nl/~hvdkooij ------------------------------------------------------------- Use of any of my email addresses for unsollicited (commercial) email is a clear intrusion of my privacy and illegal!
Quoted 8 lines · Philipp Rumpf
Quoted 4 lines
I don't however have anything
to boot right now - apparently this disc was used for swap when this workstations was running HP-UX in the dim distant past (you should see the dust).I think you have the choice to either wait til Linux is bootable or get a second hard disk and an HP-UX on it. The disks should be narrow SCSI so the second disk shouldn't really be much of a problem.
That might be feasible. Is there no netbooting software available? I've used RARP, BOOTP and TFTP to load a sun3 kernel before and the HP seems to be looking for a network host to respond.
Signature · 4 lines
Matthew Wilcox <[email protected]> "Windows and MacOS are products, contrived by engineers in the service of specific companies. Unix, by contrast, is not so much a product as it is a painstakingly compiled oral history of the hacker subculture." - N Stephenson