Skip to contentSkip to conversation

Paul's devel branch on Lombard?

DISCUSSION Shaw Terwilliger 1 participant 1 message Sep 8, 1999

lore
Share & tools
lore
#0 lore raw

I'm using Pauls' stable branch (2.2.12) from his rsync archives on my Lombard PowerBook. I've wanted to use the power management features in the new kernels, but I have yet to build a kernel that fully boots.

As of today's kernel sources, it boots but pulls a Machine Check in one of my init scripts. Each time I boot it, it does in a different place. The attached dump is failing on the "exim" script ("S20exim").

I'm using the same kernel configuration I'm using for 2.2.12 (which works great from the SCSI to the modem to the framebuffer to USB), but 2.2.12 doesn't offer sleep mode. :)

A hand-typed dump appears below. I'll send my .config if it would help.

Machine check in kernel mode.
Caused by (From msr): regs c75dbd10 Unknown values in msr
NIP: C000BDCC XER: 00000000 LR: C0011DD0 REGS: c75dbd10 TRAP: 0200
MSR: 00009030 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c75da000[111] 'S20exim' Last syscall: 90
last math c75da000
GPR00: B6337806 C75DBDC0 C75DA000 BB04D805 01743000 0007FFC0 C037BCC0 C037BCE0
GPR08: 00000008 00000001 00000000 00000001 24842224 018CF840 00000000 01808294
GPR16: 00000000 30056500 7FFFE408 30056530 00009032 075DBE80 00000000 C7D4CB00
GPR24: 01745000 01742000 01745000 00003000 01745000 C02CD220 FE8BCFFF 01743000
vector: 200 at pc = c000bdcc, msr = 9030, sp = c75dbdc0 [c75dbd10] current = c75da000, pid = 111, comm = S20exim

Signature · 3 lines
Shaw Terwilliger ([email protected])

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/