lvmcreate_initrd error? vgscan from initrd error?
Hi Harald,
sorry, i wasn't able to read the attachement.
But anyway, could you check, if all necessary device specials (/dev/sda10 etc.) exist in the initrd.gz?
Cheers,
Heinz
Quoted 29 lines
--UlVJffcvxoiEqYs2
Content-Type: text/plain; charset=us-asciiHi,
I'm trying to use LVM 0.7 with the SuSE 6.2 kernel (2.2.10-SuSE). Works fine so far but not if I try to use the initrd creation script. Machine boots fine, linuxrd starts but vgscan does not find any volume groups. I tried "vgscan -v" but this just shows it doesn't find any VGs :-/. Hence "vgchange -ay" fails.
It _does_ work, however, in
/etc/rc.d/boot(just before the MD stuff is initialized), except that it can't create/etc/lvmtab*(root is mounted RO at this time). This is kinda catch-22 situation...What gives? What kind of information do you need to see what's (not) going on? I ran "vgscan -d" from initrd and after the initial boot sequence and appended the outputs - maybe you can see the relevant parts - I can't. It seems vgscan does not find
/dev/sda10somehow (while it does find/dev/hda7).Here's some info at least
seneca:/usr/src/LVM/0.7 # cat
/proc/lvm
LVM module version 0.7 (12/07/1999)Total: 1 VG 2 PVs 2 LVs (2 LVs open 2 times)
Quoted 10 lines
Global: 12832 bytes vmalloced IOP version: 4 0:14:12 active
VG: vg1 [2 PV, 2 LV/2 open] PE Size: 4096 KB
Usage [KB/PE]: 6737920 /1645 total 2146304 /524 used 4591616 /1121 free
PVs: [AA]/dev/hda72584576 /631 2146304 /524 438272 /107
[AA]/dev/sda104153344 /1014 0 /0 4153344 /1014
LVs: [AWDL ] publv 2048000 /500 1x open
[AWDL ] testlv 98304 /24 1x open
<SNIP>
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Systemmanagement CS-TS T-Nova
Entwicklungszentrum Darmstadt
Heinz Mauelshagen Otto-Roehm-Strasse 71c
Senior Systems Engineer Postfach 10 05 41
64205 Darmstadt [email protected] Germany +49 6151 886-425 FAX-386
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-