Skip to contentSkip to conversation

Linux kernels for Microchip Polarfire Icicle board

DISCUSSION Ben Dooks 2 participants 3 messages Oct 27, 2020 – Oct 28, 2020 RISC-V

lore
Share & tools
lore

Ben Dooks

author
#0 lore raw

I have been looking at running a new kernel on a Polarfire icicle board. I started with the Yocto from Microchip, but was wondering if there is any other work around this, public repositories or anyone else working on it who wanted to collaborate.

I would particularly like to get PCIe and USB working.

Signature · 9 lines
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius

https://www.codethink.co.uk/privacy.html

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
#1 lore raw
Quoted 7 lines · Ben Dooks

I have been looking at running a new kernel on a Polarfire icicle board. I started with the Yocto from Microchip, but was wondering if there is any other work around this, public repositories or anyone else working on it who wanted to collaborate.

I would particularly like to get PCIe and USB working.

Microchip is working on upstreaming the driver for quite some time now. The drivers are posted on relative subsystem mailing-lists.

PCIe latest version: https://www.spinics.net/lists/linux-pci/msg100789.html
Clk latest version: https://www.spinics.net/lists/linux-clk/msg52244.html

I believe the rest was not posted for review yet.

Quoted 11 lines

--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius

https://www.codethink.co.uk/privacy.html

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

author
#2 lore raw
Quoted 7 lines · David Abdurachmanov
Quoted 6 lines · Ben Dooks

I have been looking at running a new kernel on a Polarfire icicle board. I started with the Yocto from Microchip, but was wondering if there is any other work around this, public repositories or anyone else working on it who wanted to collaborate.

Quoted 7 lines
Quoted 1 line

I would particularly like to get PCIe and USB working.

Microchip is working on upstreaming the driver for quite some time now. The drivers are posted on relative subsystem mailing-lists.

PCIe latest version: https://www.spinics.net/lists/linux-pci/msg100789.html
Clk latest version: https://www.spinics.net/lists/linux-clk/msg52244.html

Thanks, I will go look at the pcie patches and see if I can get any further with getting PCIe cards detected.

Signature · 9 lines
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius

https://www.codethink.co.uk/privacy.html

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv