LXT972 Changes

I am porting U-Boot from a PQ2FADS evaluation board to a custom board with an LXT972 Ethernet PHY Transceiver. Anyone done this and aware of the changes
to be made?

Thank you.

Hi,

This might be OT here as I am only talking about the Linux Kernel itself:
I am using an PQ3 MPC8540ADS-like board with an Intel LXT971 PHY. I was only doing changes on Linux in the Gianfar driver temporarily as we will change the PHY later on our platform.
I use the "Generic PHY" for the LXT971 and use MII mode instead of GMII.

Well, have a look at the changes I made... maybe you can adopt it to U-Boot.

Best greets,

Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany

http://www.anagramm.de
Phone: +49-89-741518-50
Fax: +49-89-741518-19

-------------- next part --------------
A non-text attachment was scrubbed...
Name: gianfar.diff
Type: text/x-diff
Size: 1469 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20050425/e67548b9/attachment.diff