Adaptec PowerDomain 29160N supported?
I'm ready to purchase an adaptec scsi card to replace my initio miles (doesn't work under linux/ppc), and I noticed that the 29160N is around the same price as the 2940UW... so, my question is, is it supported under LinuxPPC? and what exactly makes it 160MB/s? if anyone else owns this card, I'd like to hear your impressions..
regards,
jonathan
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 5 lines · jingai
I'm ready to purchase an adaptec scsi card to replace my initio miles (doesn't work under linux/ppc), and I noticed that the 29160N is around the same price as the 2940UW... so, my question is, is it supported under LinuxPPC? and what exactly makes it 160MB/s? if anyone else owns this card, I'd like to hear your impressions..
Which initio card are you giving up on? There are device drivers for two types of initio cards last time I looked in the kernel config files (I have no idea if they work, I've just seen them in existance).
I don't know about that particular card, but AFAIK, the only scsi
standards capable of hitting 160mb/s are u2w lvd, which means that they have a huge bandwith, and use extremely low amounts of energy Only u2w lvd drives can get anywhere near that amount of data transfer, and the chain is only as fast as your slowest device, so if you are migrating a regular ole scsi narrow drive onto a u2w lvd chain, it's only going to go at scsi narrow speeds, which is about 10mb/s max.
As a side comment, the state of scsi has gone down hill ever since Apple
stopped bundling one w/ every new mac...
HTH
--Nelson Abramson
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 7 lines · Nelson Abramson
Quoted 5 lines · jingai
I'm ready to purchase an adaptec scsi card to replace my initio miles (doesn't work under linux/ppc), and I noticed that the 29160N is around the same price as the 2940UW... so, my question is, is it supported under LinuxPPC? and what exactly makes it 160MB/s? if anyone else owns this card, I'd like to hear your impressions..
I have an Adaptec 2940U2W, the one that has recently been discontinued. Its an excellent card and is supported by LPPC. Even a 2940UW is a good card if you have the UW drives for it. I have yet to use a 29160N but I imagine it will be quality. I don't if LPPC can support it right now though. I'll leave that for someone else to answer. Unfortunately the 2940U2W costs more than the 29160N, even though it has been discontinued. Nuts.
<snip>
Quoted 6 lines
standards capable of hitting 160mb/s are u2w lvd, which means that they have a huge bandwith, and use extremely low amounts of energy Only u2w lvd drives can get anywhere near that amount of data transfer, and the chain is only as fast as your slowest device, so if you are migrating a regular ole scsi narrow drive onto a u2w lvd chain, it's only going to go at scsi narrow speeds, which is about 10mb/s max.
On a side note, the 2940U2W utilizes SpeedFlex� technology. In other words you can put any speed of SCSI drive on one of its buses and it won't slow the bus down to the speed of the slowest device. Very nice indeed. I have no idea if the 29160N supports it or not though. Other Adaptec cards did and its their patent so it may very well.
HTH
Justin
PS==>Asking the same question on both the -dev and -user lists is damn annoying. If one doesn't know, the other probably won't either since many are on the both lists. FYI
--
Justin Shore
K-State Linux Distro Mirror, Sysadmin
[email protected]
<http://vinnie.ksu.ksu.edu/mirror/rpm2html>
<ftp://vinnie.ksu.ksu.edu/pub/mirror/linux>
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/