linux-powerpc: booting from zip disk ?
Quoted 11 lines
Date: Fri, 07 Apr 2000 11:19:32 +1000
From: Brendan J Simon <[email protected]>
Subject: linux-powerpc: booting from zip disk ?Does any one know if I can boot linux from a zip disk on a PowerMac G4 ?
Ethan Benson mailed me a script to produce a CD image so I can boot from it and install Debian, but unfortunately I don't have access to a CD burner anymore.
Quoted 6 lines
So can it be done ?
Do I need to fool around in Open Firmware ?
If so what do I need to do ?Thanks,
Brendan Simon.
You sure can. Format your zip disk to HFS (not HFS+). Set up under Linux that this will be mounted at /boot. From this point, you have several options. Most people in your situation would use yaboot. There is also miboot, but I don't know if that will boot a G4.
Both of those are available at:
http://www.linuxppc.com/updates/
(they are on the right of the screen)
Hank
ps I assume you are somewhat familiar with what goes in /boot
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/