Anyone running LinuxPPC2000+PCMCIA+WallStreet?
Quoted 5 lines
From: "Mark S. Mathews" <[email protected]>
We're trying to run a LinuxPPC 2000 install on a WallStreet M4753 and trying to get PCMCIA going. Of course, we've had loads of trouble. ;-)
One of the important things is to have the right settings in /etc/pcmcia/config.opts
I use the following on my wallstreet (no extensive tests, but no crashing yet):
include port 0x000-0xfff, port 0x400-0x4ff, port 0x100-0x1000 include memory 0xa0000000/0xa0ffffff, memory 0x60000000-0x60ffffff
try and see if it works
good luck
Daniel
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/