mesh in 2.4.0-test1
Hi Geert
Quoted 2 lines
Is there anyone who is succesfully using SCSI devices connected to MESH SCSI with 2.4.0-test1 (or late 2.3.99-preX, e.g. pre9)?
I do, everything is detected fine, I use
Linux version 2.4.0-test1-ac4 (root@ma1311) (gcc version 2.95.2 19991024 (release/franzo))
The ac1 version I tried before worked aswell. dmesg looks like:
mesh: target 0 synchronous at 10.0 MB/s
Vendor: QUANTUM Model: FIREBALL_TM3200S Rev: 300X
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi1, channel 0, id 0, lun 0
mesh: target 1 synchronous at 10.0 MB/s
Vendor: MICROP Model: 4345NS Rev: x43h
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi1, channel 0, id 1, lun 0
mesh: target 3 synchronous at 10.0 MB/s
Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi1, channel 0, id 3, lun 0 scsi : detected 1 SCSI cdrom 2 SCSI disks total.
Mounting a crdrom doesen't work for me either, mount -t hfs /dev/cdrom /mnt/cdrom yields:
mount: wrong fs type, bad option, bad superblock on /dev/cdrom,
or too many mounted file systems
Cheers
Henning
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 5 lines · Henning Loeser
Quoted 2 lines
Is there anyone who is succesfully using SCSI devices connected to MESH SCSI with 2.4.0-test1 (or late 2.3.99-preX, e.g. pre9)?
I do, everything is detected fine, I use
Linux version 2.4.0-test1-ac4 (root@ma1311) (gcc version 2.95.2 19991024 (release/franzo))
Hmm... I just tried a kernel without support for my sym53c875, and that didn't work either, so it's not a multiple SCSI adapter issue. During SCSI device probing, it just waits 30 seconds and doesn't find anything.
The weird thing is that the MESH driver didn't change. Let's enable debugging and retry...
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
fbcon-cfb8.c
Hi,
trying to fix my console character displayment I wonder whether I'm looking at the right place ?????
When in the console with 8bpp, fbcon-cfb8.c is the driver the kernel uses right? Not the tdfxfb driver for the card?
Cheers
Henning
--------------------------------------------------------------------------
Henning Loeser Fachbereich Physik
email: [email protected] AG Oberflaechen
Philipps-Uni Marburg
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Re: fbcon-cfb8.c
Quoted 4 lines · Henning Loeser
trying to fix my console character displayment I wonder whether I'm looking at the right place ?????
When in the console with 8bpp,fbcon-cfb8.cis the driver the kernel uses right? Not the tdfxfb driver for the card?
Tdxfb is accelerated. So unless you disable acceleration, it uses the operations in fbcon_banshee8 in tdxfb.c:
info->dispsw = noaccel ? fbcon_cfb8 : fbcon_banshee8
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Re: fbcon-cfb8.c
Quoted 6 lines · Geert Uytterhoeven
Quoted 4 lines · Henning Loeser
trying to fix my console character displayment I wonder whether I'm looking at the right place ?????
When in the console with 8bpp,fbcon-cfb8.cis the driver the kernel uses right? Not the tdfxfb driver for the card?
Quoted 8 lines
Tdxfb is accelerated. So unless you disable acceleration, it uses the operations in
fbcon_banshee8intdxfb.c:info->dispsw = noaccel ? fbcon_cfb8 : fbcon_banshee8Gr{oetje,eeting}s,
Geert
Thanks, if I simply make it call fbcon-cfb8 no matter what the font appears correctly. So I guess what I have to acctually do is to fix the 'do_putc' and 'do_putcs' functions in tdfxfb.c to diplay BIGENDIAN characters correctly.
That's what your nibbletab_cfb8 does in fbcon-cfb8 right?
Henning
--------------------------------------------------------------------------
Henning Loeser Fachbereich Physik
email: [email protected] AG Oberflaechen
Philipps-Uni Marburg
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Re: fbcon-cfb8.c
Quoted 10 lines · Henning Loeser
Quoted 9 lines · Geert Uytterhoeven
Quoted 4 lines · Henning Loeser
trying to fix my console character displayment I wonder whether I'm looking at the right place ?????
When in the console with 8bpp,fbcon-cfb8.cis the driver the kernel uses right? Not the tdfxfb driver for the card?Tdxfb is accelerated. So unless you disable acceleration, it uses the operations in
fbcon_banshee8intdxfb.c:
Quoted 6 lines
Quoted 1 line
info->dispsw = noaccel ? fbcon_cfb8 : fbcon_banshee8Thanks, if I simply make it call fbcon-cfb8 no matter what the font appears correctly. So I guess what I have to acctually do is to fix the '
do_putc' and 'do_putcs' functions intdfxfb.cto diplay BIGENDIAN characters correctly.
Yes. Perhaps the graphics accelerator has a flag to specify to use big endian mode, and this flag isn't set?
Quoted 1 line
That's what your
nibbletab_cfb8does in fbcon-cfb8 right?
Yes.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/