Multi-boot advice.
Quoted 8 lines · Iain Sandoe
Hi all,
I've just got a G4/500 - and I want to configure it to boot:
LinuxPPC.
MacOS (9)
MacOS (X) / Darwin
<snip>
Someone posted a triple booting OF script a day or two ago. Check out the message
at: http://lists.linuxppc.org/listarcs/linuxppc-user/200006/msg01350.html
HTH
--Nelson Abramson
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 4 lines · Hot Diggety! Iain Sandoe was rumored to have
Hi all,
I've just got a G4/500 - and I want to configure it to boot:
Me too :) I haven't gotten LinuxPPC 2000 to boot the 2.2.15pre3 kernel yet, so haven't installed that one yet, but MacOS 9 and MacOS X works good.
Quoted 3 lines
I think I read that I must put the Linux boot partition before the MacOS - X one?
Does it matter which partition is the MacOS-9 one?
According to the OS X docs, I believe it says MacOS 9 must be installed first, so presumably first partition or so. MacOS X can go anywhere, as I think is also true for LinuxPPC.
-Dan
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 8 lines · Iain Sandoe
LinuxPPC.
MacOS (9)
MacOS (X) / DarwinI think (from the comments that have passed on the list) that there may be some constraints on partition ordering - and booters.
http://sdb.suse.de/sdb/en/html/olh_ppc_macosx.html
Quoted 1 line
Does it matter which partition is the MacOS-9 one?
No.
Gruss Olaf
--
$ man clone
BUGS
Main feature not yet implemented...
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 11 lines · Dan Foster
Quoted 4 lines · Hot Diggety! Iain Sandoe was rumored to have
Hi all,
I've just got a G4/500 - and I want to configure it to boot:
Me too :) I haven't gotten LinuxPPC 2000 to boot the 2.2.15pre3 kernel yet, so haven't installed that one yet, but MacOS 9 and MacOS X works good.
Quoted 8 lines
Quoted 3 lines
I think I read that I must put the Linux boot partition before the MacOS - X one?
Does it matter which partition is the MacOS-9 one?According to the OS X docs, I believe it says MacOS 9 must be installed first, so presumably first partition or so. MacOS X can go anywhere, as I think is also true for LinuxPPC.
I recommend installing MacOS X before you install Linux, because the MacOS X installer can subdivide a single OS X partition into root, swap, and usr partitions. This changes the numbers of all partitions beyond, potentially confusing an already installed Linux.
Holger
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 7 lines · Iain Sandoe
I've just got a G4/500 - and I want to configure it to boot:
LinuxPPC.
MacOS (9)
MacOS (X) / DarwinDoes anyone know if there is one boot method that will do all three?
Yes. New-world machines like yours have a built-in graphical multibooter. Hold down option during boot, and you get a button for each bootable volume found by open firmware. For this to work with Linux, you must be using an OF-bootable partition with yaboot, such as the one set up by ybin
<http://www.alaska.net/~erbenson/ybin/>. In the latest version, there's even a cute penguin icon for the yaboot button.
This method is somewhat slow, and you *must* hold down option to boot into any OS other than your default. Because I rarely boot out of Linux, however, I use it on my iMac 350 to tri-boot with MacOS 9 and Darwin.
I believe this should work on the iBook, AGP G4, slot-loading iMacs, and Firewire PowerBooks. Can anyone verify or correct this?
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 2 lines · Iain Sandoe
I think I read that I must put the Linux boot partition before the MacOS - X one?
If you are using yaboot with an OF-bootable partition (e.g. you are using ybin to set up a bootstrap partition), then placing that partition before MacOS will allow you to boot Linux by default without changing any open firmware settings.
Other than that, partition order shouldn't matter.
Speaking of yaboot, I have a question. Can yaboot boot MacOS, or can I make it exit back to OF without rebooting?
I'd like to just have my machine always load yaboot, and then use the yaboot prompt to choose my OS. But once I'm in yaboot, Linux seems to be my only option. Is this true? If so, can it be changed?
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 10 lines · Matt Brubeck
Quoted 2 lines · Iain Sandoe
I think I read that I must put the Linux boot partition before the MacOS - X one?
If you are using yaboot with an OF-bootable partition (e.g. you are using ybin to set up a bootstrap partition), then placing that partition before MacOS will allow you to boot Linux by default without changing any open firmware settings.
if you use a multiboot script and you place the Apple_Bootstrap partition first you will always get the boot choice without altering OF settings.
Quoted 4 lines
Other than that, partition order shouldn't matter.
Speaking of yaboot, I have a question. Can yaboot boot MacOS, or can I make it exit back to OF without rebooting?
well strictly speaking, no. yaboot cannot boot anything else, and once its loaded OpenFirmware is pretty much destroyed. you can however use a magicboot script to give you the choice to boot linux or macos, this scriptloads before yaboot and thus can boot macos.
Quoted 3 lines
I'd like to just have my machine always load yaboot, and then use the yaboot prompt to choose my OS. But once I'm in yaboot, Linux seems to be my only option. Is this true? If so, can it be changed?
yes use a magicboot script. see the ybin docs.
Quoted 2 lines
Signature · 2 lines
Ethan Benson http://www.alaska.net/~erbenson/