Skip to contentSkip to conversation

Current status on Voodoo3 support?

DISCUSSION William H. Schultz 3 participants 3 messages Jul 26, 2000 – Jul 27, 2000 1 message not in the archive

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive

Hello all.

I was just wondering where I can find information on the status of Voodoo3 support. I noticed with my latest rsync of the 2.4.x kernel that DRI support finally compiles--but the voodoo3 module still doesn't compile. Having no experience at all in coding drivers, is there anything I can do to help out?

Hank

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#2 lore raw
Quoted 5 lines · William H. Schultz

I was just wondering where I can find information on the status of Voodoo3 support. I noticed with my latest rsync of the 2.4.x kernel that DRI support finally compiles--but the voodoo3 module still doesn't compile. Having no experience at all in coding drivers, is there anything I can do to help out?

For now, I'd recommend using the 2.4.x driver (tdfxfb.c) in 2.2. I've put together a patch that should apply cleanly to the 2.2.1{6,7} kernels, and it is located here:

http://www.cise.ufl.edu/~phandel/linux/patch/

Download and apply the Config.in, Makefile.in, and fbmem.c patches. If you have a 2.3.x or 2.4.x tdfxfb.c, you can patch it with the tdfx_tdfxfb.c.diff patch, or else just grab the already-patched tdfxfb.c and put it in linux/drivers/video.

Thanks,
Peter

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#3 lore raw

current status of kernel devel vs. stable ..

Maybe Cort/Paul/Ben or other kernelppc developers can answer this.

What happens to the current stable sources 2.2 when 2.4 comes out. Are the changes made to the 2.2 series merged into the 2.4. I've been very happy with the current stable tree (vanilla + prepatch + usb backport). However in order to get some really cutting edge USB stuff I;ve had to get the bk-devel tree (currently 2.4.0-test5). This has built fine and even boots OK. There are a couple of small problems:

1. Occasionally my mouse freezes in X. The only way to get it back seems to change to a different VT and back.

2. Overall the system feels somewhat sluggish when running gnome. I have lots of memory 160 MB and was wondering what was going on.

Thanks - Ram

PS: I have an iMac 333 MHz with 10 MB RAM and upgraded hard disk.

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/