OnStream DI-30 with ide-tape version 1.16f problems
A message that is not in the archive (sent off-list or not yet received): [email protected]
I have the same problem, and yes I have a medium inserted. What can I
do?
Regards.
-Jorge
P.D. Debian 2.2 (+ some updates from woody to complaint 2.4 series of
kernels)
2.4.0.test11 + reiserfs
Tyan K7 VIA + CMD649
Same tape drive and same revision of firmware. (primary in the
second channel of the motherboard)
==============================================================
Jorge Boncompte - Técnico de sistemas
DTI2 - Desarrollo de la Tecnología de las Comunicaciones
--------------------------------------------------------------
C/ Abogado Enriquez Barrios, 5 14004 CORDOBA (SPAIN)
Tlf: +34 957 761395 / FAX: +34 957 450380
--------------------------------------------------------------
[email protected] _-_-_-_-_-_-_-_-_-_-_-_-_-_ http://www.dti2.net
==============================================================
Without wicker a basket cannot be done.
==============================================================
----- Mensaje original -----
De: "Kurt Garloff" <[email protected]>
Para: "Noel Burton-Krahn" <[email protected]>
CC: <[email protected]>; <[email protected]>
Enviado: martes, 17 de octubre de 2000 10:53
Asunto: Re: OnStream DI-30 with ide-tape version 1.16f problems
Quoted 8 lines · Noel Burton-Krahn
mt -f
/dev/nht0status
/dev/nht0: Device or resource busytail
/var/log/messageskernel: ide-tape: hdd <-> ht0: OnStream DI-30 rev 1.08 kernel: ide-tape: hdd <-> ht0: 990KBps, 64*32kB buffer, 10208kB
pipeline, 60ms tDSC
Quoted 1 line
kernel: ide-tape: ht0: I/O error, pc = 0, key = 2, asc = 3a, ascq =
0
MEDIUM NOT PRESENT.
Quoted 1 line
kernel: ide-tape: ht0: drive not ready
Did you insert a medium?
Regards,
--
Kurt Garloff <[email protected]> Eindhoven, NL
GPG key: See mail header, key servers Linux kernel development
SuSE GmbH, Nuernberg, FRG SCSI, Security
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/