airport woes?
Hi all,
Something appears to be odd with the airport under PPC.
Unfortunatly I've been stuck behind a fairly awful link recently, and have had to open interactive connections to remote hosts. The quality of the link is terrible with average ping times of up to 1sec, and packet loss between 12 and 25 percent.
I've been using ssh to connect to remote hosts, and needless to say the response time is shocking.
However, I've also had problems where the session totally locks up - I type at the terminal as much as I like, but nothing reaches the other end. At first I put this down to the crappy network link. However I've also noticed more recently that only _half_ the connection craps out - I can still receive data from the remote server. Weird.
Then today I switched to use ethernet instead of the airport (I was transfering some large files and wanted to use 100Mb), and I noticed that I wasn't getting the lockup problems with the remote hosts.
I'm using benh's latest kernel and airport driver. Now I can't think what would be causing this, but I thought you'd like to know. Anyone else seen this problem?
Regards,
Chris
--
----------------------------------------------------------------------
Knuth: premature optimization is the root of all evil.
----------------------------------------------------------------------
Reply with subject 'request key' for GPG public key. KeyID 0xB4E24219
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 4 lines
I'm using benh's latest kernel and airport driver. Now I can't think what would be causing this, but I thought you'd like to know. Anyone else seen this problem?
I have the above (with the patched pcmcia package), bronze lombard 400mhz, and everything works for me. It honestly sounds like a lack of signal problem. There are a couple of graphical signal strength monitors, or you could do what I did, and write a stupid shell script (ask me if you want it) to dredge the signal strength out of /proc.
Hope this helps,
- Rob
.
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 11 lines · Rob
Quoted 4 lines
I'm using benh's latest kernel and airport driver. Now I can't think what would be causing this, but I thought you'd like to know. Anyone else seen this problem?
I have the above (with the patched pcmcia package), bronze lombard 400mhz, and everything works for me. It honestly sounds like a lack of signal problem. There are a couple of graphical signal strength monitors, or you could do what I did, and write a stupid shell script (ask me if you want it) to dredge the signal strength out of /proc.
I don't think its signal strength, since I'm almost sitting on top of the base station 90% of the time - and it doesn't seem to affect data coming back to me.
Also, I've got a pismo - with the built in "apple branded" airport card, and I'm using BenH's airport driver (not the pcmcia one). Ben mailed me earlier to say he is working on something...
Thanks,
Chris
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 9 lines · Chris Leishman
I've been using ssh to connect to remote hosts, and needless to say the response time is shocking.
However, I've also had problems where the session totally locks up - I type at the terminal as much as I like, but nothing reaches the other end. At first I put this down to the crappy network link. However I've also noticed more recently that only _half_ the connection craps out - I can still receive data from the remote server. Weird.
Quoted 7 lines
Then today I switched to use ethernet instead of the airport (I was transfering some large files and wanted to use 100Mb), and I noticed that I wasn't getting the lockup problems with the remote hosts.
I'm using benh's latest kernel and airport driver. Now I can't think what would be causing this, but I thought you'd like to know. Anyone else seen this problem?
Me. I went nuts one day when my ssh connections got constantly stuck and the only thing I could do was to killall ssh and restart the connection... I blamed about every part of the network, and finally realized that I wasn't getting this symptom as long as I was using the GMAC interface instead of airport... I'm using kernel 2.2.17pre20-ben3 and aswell Ben's newest airport driver... And yes, if you e.g. run irc on one session, you can easily see that even though you cannot transmit any characters on the remote host, it seems that the other people are writing to you nonetheless. So, it's a pretty weird and unexplainable problem. Ben?
-topi
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 7 lines · Chris Leishman
I don't think its signal strength, since I'm almost sitting on top of the base station 90% of the time - and it doesn't seem to affect data coming back to me.
Also, I've got a pismo - with the built in "apple branded" airport card, and I'm using BenH's airport driver (not the pcmcia one). Ben mailed me earlier to say he is working on something...
Anyone know if this is fixed, or a work around? I've got the same setup, with the same problem. My ssh connections over airport freeze.
Thanks,
-Rms
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/