Recent ide patches and DMA

Quoted 21 lines

With recent ide patches, the ide driver seems to try to use DMA mode even for a drive which dosen't support it. CONFIG_IDEDMA_PCI_AUTO is enabled but even so with the stock kernel this dosen't happen. older patches didn't have this behavior either. Is this change intentional ?

hdc: 333630 sectors (171 MB) w/32KiB Cache, CHS=1011/15/22, DMA Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdc:hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x04 { DriveStatusError }
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x04 { DriveStatusError }
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x04 { DriveStatusError }
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x04 { DriveStatusError }
hdc: DMA disabled
ide1: reset: success
hdc1

~ $ hdparm -i /dev/hdc

/dev/hdc:

Quoted 6 lines

Model=QUANTUM ELS170A, FwRev=4.20, SerialNo=166304085456 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>5Mbs RotSpdTol>.5% } RawCHS=1011/15/22, TrkSize=11264, SectSize=512, ECCbytes=4 BuffType=3(DualPortCache), BuffSize=32kB, MaxMultSect=8, MultSect=off DblWordIO=no, OldPIO=2, DMA=no
CurCHS=1011/15/22, CurSects=333629, LBA=no

Which chipset are you using?

Signature · 2 lines

Vojtech Pavlik
SuSE Labs