Skip to contentSkip to conversation

Nightly usb oops

DISCUSSION J. Nick Koston 2 participants 2 messages Dec 4, 2000

lore
Share & tools
lore

J. Nick Koston

author
#0 lore raw

My machine crashes almost every night with this oops. I've finally managed to catch it before it was totally gone.

ksymoops 2.3.4 on i686 2.4.0-test10. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.0-test10 (specified) -m /boot/System.map-2.4.0-test10 (specified)

Warning (compare_maps): snd symbol pm_register not found in /lib/modules/2.4.0-test10/misc/snd.o. Ignoring /lib/modules/2.4.0-test10/misc/snd.o entry Warning (compare_maps): snd symbol pm_send not found in /lib/modules/2.4.0-test10/misc/snd.o. Ignoring /lib/modules/2.4.0-test10/misc/snd.o entry Warning (compare_maps): snd symbol pm_unregister not found in /lib/modules/2.4.0-test10/misc/snd.o. Ignoring /lib/modules/2.4.0-test10/misc/snd.o entry

      0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580)
      0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=1b, PID=69(IN) (buf=0fe124a4)
      00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=1b, PID=e1(OUT) (buf=00000000)
      0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580)
      0fef3180 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=1b, PID=69(IN) (buf=0fe124a4)
      00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=1b, PID=e1(OUT) (buf=00000000)
      0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580)
      0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=1b, PID=69(IN) (buf=0fe124a4)
      00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=1b, PID=e1(OUT) (buf=00000000)
      0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580)
      0fef3180 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=1b, PID=69(IN) (buf=0fe124a4)
      00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=1b, PID=e1(OUT) (buf=00000000)
      0fef3340 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=1b, PID=2d(SETUP) (buf=0bd41580)
      0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=1b, PID=69(IN) (buf=0fe124a4)
      00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=1b, PID=e1(OUT) (buf=00000000)
      0fef33c0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=22, PID=2d(SETUP) (buf=0083bf80)
      0fef3240 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=22, PID=69(IN) (buf=015a6ca4)
      00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=22, PID=e1(OUT) (buf=00000000)
      0fef33c0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=22, PID=2d(SETUP) (buf=0083bf80)
      0fef3340 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=22, PID=69(IN) (buf=015a6ca4)
      00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=22, PID=e1(OUT) (buf=00000000)
      0fef33c0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=22, PID=2d(SETUP) (buf=0083bf80)
      0fef3240 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=22, PID=69(IN) (buf=015a6ca4)
      00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=22, PID=e1(OUT) (buf=00000000)
      0fef33c0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=22, PID=2d(SETUP) (buf=0083bf80)
      0fef3340 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=22, PID=69(IN) (buf=015a6ca4)
      00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=22, PID=e1(OUT) (buf=00000000)
      0fef33c0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=22, PID=2d(SETUP) (buf=0083bf80)
      0fef3240 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=22, PID=69(IN) (buf=015a6ca4)
      00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=22, PID=e1(OUT) (buf=00000000)
      0fef3180 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=25, PID=2d(SETUP) (buf=0fe3a300)
      0fef33c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc80)
      0fef3480 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc88)
      0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc90)
      0fef3240 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc98)
      0fef3400 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca0)
      0fef3280 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca8)
      0fef3340 e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bcb0)
      00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=25, PID=e1(OUT) (buf=00000000)
      0fef3280 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=25, PID=2d(SETUP) (buf=0fe3a300)
      0fef3400 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc80)
      0fef3240 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc88)
      0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc90)
      0fef3480 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc98)
      0fef33c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca0)
      0fef3180 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca8)
      0fef3300 e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bcb0)
      00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=25, PID=e1(OUT) (buf=00000000)
      0fef3180 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=25, PID=2d(SETUP) (buf=0fe3a300)
      0fef33c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc80)
      0fef3480 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc88)
      0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc90)
      0fef3240 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc98)
      0fef3400 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca0)
      0fef3280 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca8)
      0fef3340 e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bcb0)
      00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=25, PID=e1(OUT) (buf=00000000)
      0fef3280 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=25, PID=2d(SETUP) (buf=0fe3a300)
      0fef3400 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc80)
      0fef3240 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc88)
      0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc90)
      0fef3480 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc98)
      0fef33c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca0)
      0fef3180 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca8)
      0fef3300 e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bcb0)
      00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=25, PID=e1(OUT) (buf=00000000)
      0fef3180 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=25, PID=2d(SETUP) (buf=0fe3a300)
      0fef33c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc80)
      0fef3480 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc88)
      0fef31c0 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc90)
      0fef3240 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bc98)
      0fef3400 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca0)
      0fef3280 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bca8)
      0fef3340 e3 SPD Active Length=0 MaxLen=6 DT1 EndPt=0 Dev=25, PID=69(IN) (buf=0ff2bcb0)
      00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=25, PID=e1(OUT) (buf=00000000)
Unable to handle kernel NULL pointer dereference at virtual address 00000014
c01faed6
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c01faed6>]

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: 00000008 ebx: cbd41385 ecx: cbd41380 edx: 00000008
esi: 00000000 edi: cfe12400 ebp: 00000001 esp: c14fdf0c
ds: 0018 es: 0018 ss: 0018
Process khubd (pid: 7, stackpage=c14fd000)

Stack: cbd41385 00000000 cfe12400 00000001 00000008 00000000 00000009 00000000 
       00000001 00000000 00000000 c01fb1f3 cfe12400 00000000 cfe12400 c5985802 
       cfe12400 00000000 cbd41380 cbd41380 c01fb7f1 cfe12400 00000001 00000000 
Call Trace: [<c01fb1f3>] [<c01fb7f1>] [<c01fcc60>] [<c01fce32>] [<c0293580>] [<c0293647>] [<c01fcfa5>] 
       [<c0105000>] [<c0108c03>] 
Code: 8b 42 0c c7 44 24 24 00 00 00 00 0f b6 72 04 39 74 24 24 0f
Quoted 1 line
Quoted 1 line

EIP; c01faed6 <usb_set_maxpacket+46/120> <=====

Trace; c01fb1f3 <usb_set_configuration+e3/f0> Trace; c01fb7f1 <usb_new_device+171/1d0> Trace; c01fcc60 <usb_hub_port_connect_change+270/300> Trace; c01fce32 <usb_hub_events+142/270> Trace; c0293580 <usb_bandwidth_option+1bf8/28ec> Trace; c0293647 <usb_bandwidth_option+1cbf/28ec> Trace; c01fcfa5 <usb_hub_thread+45/70>
Trace; c0105000 <empty_bad_page+0/1000> Trace; c0108c03 <kernel_thread+23/30>
Code; c01faed6 <usb_set_maxpacket+46/120> 00000000 <_EIP>:
Code; c01faed6 <usb_set_maxpacket+46/120> <=====
0: 8b 42 0c mov 0xc(%edx),%eax <=====
Code; c01faed9 <usb_set_maxpacket+49/120>
3: c7 44 24 24 00 00 00 movl $0x0,0x24(%esp,1)
Code; c01faee0 <usb_set_maxpacket+50/120>
a: 00
Code; c01faee1 <usb_set_maxpacket+51/120>
b: 0f b6 72 04 movzbl 0x4(%edx),%esi
Code; c01faee5 <usb_set_maxpacket+55/120>
f: 39 74 24 24 cmp %esi,0x24(%esp,1)
Code; c01faee9 <usb_set_maxpacket+59/120>
13: 0f 00 00 sldt (%eax)

Unable to handle kernel NULL pointer dereference at virtual address 00000008
c013ed99
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c013ed99>]
EFLAGS: 00010246
eax: 00000008   ebx: 00000000   ecx: 0000000c   edx: 00000002
esi: 00000000   edi: 00000000   ebp: 00000008   esp: c36f3f08
ds: 0018   es: 0018   ss: 0018
Process initlog (pid: 532, stackpage=c36f3000)
Stack: c36f2000 00000000 00000002 00000000 0000000c 0000000e c013eec3 00000002 
       00000008 c36f3f48 c36f3f4c c36f2000 00000002 00000002 00000000 c36f2000 
       00000000 00000000 c013f133 00000002 00000000 00000002 cbd41140 c36f3fb8 
Call Trace: [<c013eec3>] [<c013f133>] [<c01203ed>] [<c010a637>] 
Code: 8b 45 00 85 c0 7c 59 e8 6b 1f ff ff 89 c6 bb 20 00 00 00 85
Quoted 1 line
Quoted 1 line

EIP; c013ed99 <do_pollfd+29/b0> <=====

Trace; c013eec3 <do_poll+a3/e0>
Trace; c013f133 <sys_poll+233/350>
Trace; c01203ed <sys_nanosleep+10d/190>
Trace; c010a637 <system_call+33/38>
Code; c013ed99 <do_pollfd+29/b0>
00000000 <_EIP>:
Code; c013ed99 <do_pollfd+29/b0> <=====
0: 8b 45 00 mov 0x0(%ebp),%eax <=====
Code; c013ed9c <do_pollfd+2c/b0>
3: 85 c0 test %eax,%eax
Code; c013ed9e <do_pollfd+2e/b0>
5: 7c 59 jl 60 <_EIP+0x60> c013edf9 <do_pollfd+89/b0>
Code; c013eda0 <do_pollfd+30/b0>
7: e8 6b 1f ff ff call ffff1f77 <_EIP+0xffff1f77> c0130d10 <fget+0/30>
Code; c013eda5 <do_pollfd+35/b0>
c: 89 c6 mov %eax,%esi
Code; c013eda7 <do_pollfd+37/b0>
e: bb 20 00 00 00 mov $0x20,%ebx
Code; c013edac <do_pollfd+3c/b0>
13: 85 00 test %eax,(%eax)

Unable to handle kernel NULL pointer dereference at virtual address 00000040
c013ed99
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c013ed99>]
EFLAGS: 00210246
eax: 00000040   ebx: 00000000   ecx: 00000044   edx: 00000006
esi: 00000000   edi: 00000000   ebp: 00000040   esp: c09a7f08
ds: 0018   es: 0018   ss: 0018
Process deskguide_apple (pid: 835, stackpage=c09a7000)
Stack: c09a6000 00000000 00000006 00000000 00000044 00000046 c013eec3 00000006 
       00000040 c09a7f48 c09a7f4c c09a6000 00000006 00000006 00000000 c09a6000 
       00000000 00000000 c013f133 00000006 00000000 00000006 cbd41880 c09a7fb8 
Call Trace: [<c013eec3>] [<c013f133>] [<c010a637>] 
Code: 8b 45 00 85 c0 7c 59 e8 6b 1f ff ff 89 c6 bb 20 00 00 00 85
Quoted 1 line
Quoted 1 line

EIP; c013ed99 <do_pollfd+29/b0> <=====

Trace; c013eec3 <do_poll+a3/e0>
Trace; c013f133 <sys_poll+233/350>
Trace; c010a637 <system_call+33/38>
Code; c013ed99 <do_pollfd+29/b0>
00000000 <_EIP>:
Code; c013ed99 <do_pollfd+29/b0> <=====
0: 8b 45 00 mov 0x0(%ebp),%eax <=====
Code; c013ed9c <do_pollfd+2c/b0>
3: 85 c0 test %eax,%eax
Code; c013ed9e <do_pollfd+2e/b0>
5: 7c 59 jl 60 <_EIP+0x60> c013edf9 <do_pollfd+89/b0>
Code; c013eda0 <do_pollfd+30/b0>
7: e8 6b 1f ff ff call ffff1f77 <_EIP+0xffff1f77> c0130d10 <fget+0/30>
Code; c013eda5 <do_pollfd+35/b0>
c: 89 c6 mov %eax,%esi
Code; c013eda7 <do_pollfd+37/b0>
e: bb 20 00 00 00 mov $0x20,%ebx
Code; c013edac <do_pollfd+3c/b0>
13: 85 00 test %eax,(%eax)

3 warnings issued. Results may not be reliable.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw
Quoted 2 lines · J. Nick Koston

My machine crashes almost every night with this oops. I've finally managed to catch it before it was totally gone.

This looks like a usb device was unplugged and plugged back in. What devices do you have connected?
What host controller driver are you using?
What happens to the machine at this time of night (cron jobs, etc.)? What is your .config?
What kernel is this (and if 2.4.0-test10, does this also happen on 2.4.0-test12-pre4)?
What kind of processor is this?

In short, lots more info needed.

thanks,

greg k-h

Signature · 6 lines
greg@(kroah|wirex).com
http://immunix.org/~greg
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/