Skip to contentSkip to conversation

2.2.18 and EMU10K1 problems...

DISCUSSION Taner Halicioglu 2 participants 3 messages Jan 8, 2001 – Jan 9, 2001

lore
Share & tools
lore

Taner Halicioglu

author
#0 lore raw

(please cc me if you reply - thanks :)

I probably missed a message or note or something about this, but when I went from 2.2.17 to 2.2.18, my sound card (SB Live!) stopped working. It seems that in 2.2.18, it gets detected TWICE:

--------------------------------
kernel: Linux version 2.2.18
[...]
kernel: Creative EMU10K1 PCI Audio Driver, version 0.7, 20:05:23 Jan 7 2001
kernel: emu10k1: EMU10K1 rev 5 model 0x21 found, IO at 0xb400-0xb41f, IRQ 10 [... IDE, floppy, SCSI, eth0, partition check ...]
kernel: Creative EMU10K1 PCI Audio Driver, version 0.7, 20:05:23 Jan 7 2001
--------------------------------

This is what it normally does:

--------------------------------
kernel: Linux version 2.2.17
[...]
kernel: Creative EMU10K1 PCI Audio Driver, version 0.6, 20:25:53 Jan 7 2001
kernel: emu10k1: EMU10K1 rev 5 model 0x21 found, IO at 0xb400-0xb41f, IRQ 10 [...]
--------------------------------

In the 2.2.18 case, /proc/interrupts doesn't show anything on int 10.

I guess I should (and will) take this up with the EMU10k people, but I was just wondering if anyone here has seen this problem before? I'm curious how a broken driver would have made it into .18 like that ;-) ...unless I'm the one that is broken :)

Thanks,

-Taner
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

author
#1 lore raw

Err, I should have mentioned that the configs I used for .17 and .18 are identical, too. Machine is a dual celeron 450 on a asus p2b-ds (Adaptec aic78xx SCSI), via-rhine ethernet, and nvidia tnt2 ultra.

Thanks, again

-Taner

Quoted 27 lines · Taner Halicioglu

(please cc me if you reply - thanks :)

I probably missed a message or note or something about this, but when I went from 2.2.17 to 2.2.18, my sound card (SB Live!) stopped working. It seems that in 2.2.18, it gets detected TWICE:

--------------------------------
kernel: Linux version 2.2.18
[...]
kernel: Creative EMU10K1 PCI Audio Driver, version 0.7, 20:05:23 Jan 7 2001
kernel: emu10k1: EMU10K1 rev 5 model 0x21 found, IO at 0xb400-0xb41f, IRQ 10 [... IDE, floppy, SCSI, eth0, partition check ...]
kernel: Creative EMU10K1 PCI Audio Driver, version 0.7, 20:05:23 Jan 7 2001
--------------------------------

This is what it normally does:

--------------------------------
kernel: Linux version 2.2.17
[...]
kernel: Creative EMU10K1 PCI Audio Driver, version 0.6, 20:25:53 Jan 7 2001
kernel: emu10k1: EMU10K1 rev 5 model 0x21 found, IO at 0xb400-0xb41f, IRQ 10 [...]
--------------------------------

In the 2.2.18 case, /proc/interrupts doesn't show anything on int 10.

Quoted 8 lines

I guess I should (and will) take this up with the EMU10k people, but I was just wondering if anyone here has seen this problem before? I'm curious how a broken driver would have made it into .18 like that ;-) ...unless I'm the one that is broken :)

Thanks,

-Taner

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
In reply to Taner Halicioglu

remember seeing something about this on the list.
Build it as a module, and not into the kernel and it should work.

Signature · 8 lines
Prasanna Subash   ---   [email protected]   ---     TurboLinux, INC
------------------------------------------------------------------------
Linux, the choice          | Actually, what I'd like is a little toy
of a GNU generation   -o)  | spaceship!! 
Kernel 2.4.0-test11   /\\  | 
on a i686            _\\_v | 
                           | 
------------------------------------------------------------------------
Quoted 39 lines · Taner Halicioglu

(please cc me if you reply - thanks :)

I probably missed a message or note or something about this, but when I went from 2.2.17 to 2.2.18, my sound card (SB Live!) stopped working. It seems that in 2.2.18, it gets detected TWICE:

--------------------------------
kernel: Linux version 2.2.18
[...]
kernel: Creative EMU10K1 PCI Audio Driver, version 0.7, 20:05:23 Jan 7 2001
kernel: emu10k1: EMU10K1 rev 5 model 0x21 found, IO at 0xb400-0xb41f, IRQ 10 [... IDE, floppy, SCSI, eth0, partition check ...]
kernel: Creative EMU10K1 PCI Audio Driver, version 0.7, 20:05:23 Jan 7 2001
--------------------------------

This is what it normally does:

--------------------------------
kernel: Linux version 2.2.17
[...]
kernel: Creative EMU10K1 PCI Audio Driver, version 0.6, 20:25:53 Jan 7 2001
kernel: emu10k1: EMU10K1 rev 5 model 0x21 found, IO at 0xb400-0xb41f, IRQ 10 [...]
--------------------------------

In the 2.2.18 case, /proc/interrupts doesn't show anything on int 10.

I guess I should (and will) take this up with the EMU10k people, but I was just wondering if anyone here has seen this problem before? I'm curious how a broken driver would have made it into .18 like that ;-) ...unless I'm the one that is broken :)

Thanks,

-Taner
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/