Skip to contentSkip to conversation

Inadmissible sound dropouts on 2.2.18

DISCUSSION [email protected] 3 participants 3 messages Feb 4, 2001 – Feb 11, 2001

lore
Share & tools
lore
#0 lore raw

I found that 2.2.18 probably rudely drops samples (lets ocassionally one sample be played several times) on the Gravis Ultrasound output device. I use 2.2.18 and the native kernel drivers. I wrote this program that should produce a clean sine tone. Instead I hear a sine interspaced with crackling. The crackling repeats at 100Hz I guess. There runs nothing CPU-consuming. The sound process takes 5% CPU. It's funny Linux drops sound samples just at 5% of CPU load. I got AMD K6-2 3D 400Mhz at 400Mhz, 4*100MHz, running stably between 20-35 deg C of case temperature. I got PCI / AGP board FIC VA-503+. There are three serial ports, none of them was transceiving at that time. There is one ISA NE2000 NIC which was not sending any packets. There is a ISA Gravis Ultrasound PnP. Two IDE disks, one of them sleeping, the second spinning but nod reading/writing. 64MB of 100MHz DIMM SDRAM, which runs for years without problems. 1MB L2 cache. AGP video card ATI. No X server running, no SVGAlib application running. No USB peripherals.

The crackling is not dependent on the buffer size you can set up in the C code. The crackling is dependent on the frequency of the sine. It's clearly audible (read: annoying) at 10kHz, audible at 1kHz, inaudible at 100Hz. So I think they are sample dropouts - the card stops playing and repeats one sample until kernel gets the breath and whips itself up to supply next audio data.

There are no custom changes in the drivers - no buffer tweaking, nothing. The Gravis plays modules, midules and mp3 with nearly no problems (apart from when Loreena Mc Kennith sings too high and too loud, I hear something that looks like MP3 frames bounds, but I can't surely tell who's responsible for this - if the Fraunhofer Institute or Linux Kernel)

root@ghost:/usr/src/linux# cat /proc/version
Linux version 2.2.18 (root@ghost) (gcc version 2.95.2.1 19991024 (release)) #14
Mon Jan 29 15:14:27 MET 2001

Clock

CFLAGS=-O3 -Wall -fomit-frame-pointer
LDFLAGS=-s -lm

all: syncro beat

syncro: syncro.c

beat: beat.c

clean:
rm -f *.o core syncro beat

#include <string.h>
#include <sys/soundcard.h>
#include <sys/ioctl.h>
#include <stdlib.h>
#include <fcntl.h>
#include <errno.h>
#include <unistd.h>
#include <stdio.h>
#include <math.h>

unsigned char errmsg[256];
int r;
int dsp;
int bits=16;
int channels;
int blocksize;

float left=10000;
float right=10000;
double left_angle=0;
double right_angle=0;
unsigned char buffer[65536];

void hum(void)

{
	int a;
	int val;
	int remains;
	unsigned char *ptr;

	new_buffer:
	ptr=buffer;
	for (a=0;a<sizeof(buffer)/4;a++){
		val=32767*sin(left_angle);
		*ptr++=val&255;
		*ptr++=val>>8;
		val=32767*sin(right_angle);
		*ptr++=val&255;
		*ptr++=val>>8;
		left_angle+=2*M_PI/44100*left;
		if (left_angle>=2*M_PI) left_angle-=2*M_PI;
		right_angle+=2*M_PI/44100*right;
		if (right_angle>=2*M_PI) right_angle-=2*M_PI;
	}
	remains=sizeof(buffer);
	ptr=buffer;
	a2:
	if (!remains) goto new_buffer;
	val=write(dsp,ptr,remains);
	if (val>=0){
		remains-=val;
		ptr+=val;
		goto a2;
	}
	if (errno==EAGAIN||errno==EINTR) goto a2;
	perror("beat");
	exit(1);
}

/*-------------------------------MAIN---------------------------------------*/ int main(int argc, char **argv)

{
	int a;

again:
dsp=open("/dev/dsp",O_WRONLY);

if (dsp<0){
	if (errno==EINTR||errno==EAGAIN) goto again;
}
if (r){
	fprintf(stderr,"Can't open sound device.\n");
	exit(1);
}

r=ioctl(dsp,SNDCTL_DSP_RESET,NULL);

if (r){
	fprintf(stderr,"Can't reset sound device.\n");
	exit(1);
}

a=44100;
r=ioctl(dsp,SNDCTL_DSP_SPEED,&a);

if (r){
	fprintf(stderr,"Can't set 44100.\n");
	exit(1);
}

a=1;
r=ioctl(dsp,SNDCTL_DSP_STEREO,&a);

if (r){
	fprintf(stderr,"Can't set stereo.\n");
	exit(1);
}

a=16;
r=ioctl(dsp,SOUND_PCM_WRITE_BITS,&a);

if (r){
	fprintf(stderr,"Can't set 16bit.\n");
	exit(1);
}

r=ioctl(dsp,SNDCTL_DSP_GETBLKSIZE,&blocksize);

if (r){
	fprintf(stderr,"Can't get blocksize.\n");
	exit(1);
}

r=ioctl(dsp,SNDCTL_DSP_SYNC,NULL);

if (r){
	fprintf(stderr,"Can't sync device.\n");
	exit(1);
}

hum();

return 0;
	
	printf("Error setting up driver\n");
	return 1;
}
#1 lore raw
Quoted 5 lines · On Sun, Feb 04, 2001 at 12:07:28PM +0100, [email protected] wrote:

The crackling is not dependent on the buffer size you can set up in the C code. The crackling is dependent on the frequency of the sine. It's clearly audible (read: annoying) at 10kHz, audible at 1kHz, inaudible at 100Hz. So I think they are sample dropouts - the card stops playing and repeats one sample until kernel gets the breath and whips itself up to supply next audio data.

hrm, i just ran your test progam. i don't hear this on my gus classic / celeron 533 / 320mb ram. at least nothing that *sounds* like crackling. just a high pitched annoying noise. using 2.4.1 + andrew morton's lowlatency patches. (which are wonderful, thanks andrew!)

jiggle the cable from the GUS to wherever it goes to.

j.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
In reply to [email protected]

Hi!

Quoted 10 lines

I found that 2.2.18 probably rudely drops samples (lets ocassionally one sample be played several times) on the Gravis Ultrasound output device. I use 2.2.18 and the native kernel drivers. I wrote this program that should produce a clean sine tone. Instead I hear a sine interspaced with crackling. The crackling repeats at 100Hz I guess. There runs nothing CPU-consuming. The sound process takes 5% CPU. It's funny Linux drops sound samples just at 5% of CPU load. I got AMD K6-2 3D 400Mhz at 400Mhz, 4*100MHz, running stably between 20-35 deg C of case temperature. I got PCI / AGP board FIC VA-503+. There are three serial ports, none of them was transceiving at that time. There is one ISA NE2000 NIC

And receiving?

There are tools for measuring latency problems. Look at kernel archives.

Quoted 6 lines

The crackling is not dependent on the buffer size you can set up in the C code. The crackling is dependent on the frequency of the sine. It's clearly audible (read: annoying) at 10kHz, audible at 1kHz, inaudible at 100Hz. So I think they are sample dropouts - the card stops playing and repeats one sample until kernel gets the breath and whips itself up to supply next audio data.

Or it is just Graivs driver bug...

Quoted 5 lines

There are no custom changes in the drivers - no buffer tweaking, nothing. The Gravis plays modules, midules and mp3 with nearly no problems (apart from when Loreena Mc Kennith sings too high and too loud, I hear something that looks like MP3 frames bounds, but I can't surely tell who's responsible for this - if the Fraunhofer Institute or Linux Kernel)

;) Or maybe problem is in your application. Can you generate sample file than "play" it with cat samples > /dev/dsp? You can do it on different machines to learn if it is gravis or something else.

Pavel
PS: I think it is your app that is buggy. You write to soundcard, then you do _lots_ of floating point computation, then you write again.... If your computtation takes too long, you'll hear cracking... Of course. You wrote latency critical app!

Signature · 6 lines
I'm [email protected]. "In my country we have almost anarchy and I don't care."
Panos Katsaloulis describing me w.r.t. patents at [email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/