Skip to contentSkip to conversation

Dual Promise Ultra66 PCI Cards

DISCUSSION Adrian Chung 2 participants 3 messages Feb 4, 2001 – Feb 5, 2001

lore
Share & tools
lore
#0 lore raw

I've been attempting to get two Promise Ultra66 controllers working with an Asus P2B-F motherboard. I've got one controller successfully working, but as soon as I stick the second controller in the computer, the system refuses to boot.

With 2.2.18 and the linux-ide patches (Uniform E-IDE 6.30), the computer refuses to boot if there are no bootable drives on the motherboard's IDE controllers. I have 4 hard drives on the promise ultra66, and a cdrom drive on the motherboard's controller. I've tried setting the BIOS IDE/SCSI first option to SCSI, and it still doesn't work.

I moved my boot drive to the motherboard's controller, and then linux boots, but after detecting IDE devices, it hangs just after printing:

ide1 at ...
ide2 at ...
ide3 at ...

I don't have the exact messages at hand, but can produce them...

Any ideas? Can this work? I've read on the Promise site that flashing the second controller with their "dummy" BIOS may make a difference, but I'm not sure.

--
Adrian Chung
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw

Adrian Chung ([email protected]) wrote on 4 February 2001 15:53:

Quoted 8 lines

I've been attempting to get two Promise Ultra66 controllers working with an Asus P2B-F motherboard. I've got one controller successfully working, but as soon as I stick the second controller in the computer, the system refuses to boot.

With 2.2.18 and the linux-ide patches (Uniform E-IDE 6.30), the computer refuses to boot if there are no bootable drives on the motherboard's IDE controllers.

The same happens with a P2B-DS. It has nothing to do with the kernel, the bios doesn't try to boot (from floppy in my case).
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
Quoted 6 lines · Carlos Carvalho

Adrian Chung ([email protected]) wrote on 4 February 2001 15:53:

Quoted 5 lines

I've been attempting to get two Promise Ultra66 controllers working with an Asus P2B-F motherboard. I've got one controller successfully working, but as soon as I stick the second controller in the computer, the system refuses to boot.

Quoted 6 lines
Quoted 3 lines

With 2.2.18 and the linux-ide patches (Uniform E-IDE 6.30), the computer refuses to boot if there are no bootable drives on the motherboard's IDE controllers.

The same happens with a P2B-DS. It has nothing to do with the kernel, the bios doesn't try to boot (from floppy in my case).

The BIOS doesn't try to boot, but if I switch my bootable linux drive from the Ultra66 to the motherboard's controller, it boots just fine. Up until it detects ide devices and tries to scan the hard drives.

Then linux just hangs...

--
Adrian Chung - [email protected]

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/