Skip to contentSkip to conversation

acpi breaks async interface

DISCUSSION Juraj Bednar 2 participants 2 messages Feb 5, 2001 – Feb 7, 2001

lore
Share & tools
lore
#0 lore raw

Hello,

I just found a strange thing in 2.4.1 (don't know, if the same
occured in 2.4.0) and 2.4.1-ac3. When I enable ACPI, my serial port starts to drop some characters. When making ppp over this and doing ping, it causes great packet losts. If I turn ACPI in this configuration off, it works with no problems. I tried to switch serial port IRQ to other one (was 4, switched to 3 and tested) and it didn't help. Maybe something's broken.

ACPI related boot messages:

Feb  4 23:21:58 idoru kernel: ACPI: Core Subsystem version [20010125]
Feb  4 23:21:58 idoru kernel: ACPI: Subsystem enabled
Feb  4 23:21:58 idoru kernel: ACPI: System firmware supports: C2 C3
Feb  4 23:21:58 idoru kernel: ACPI: System firmware supports: S0 S1 S4 S5

[root@idoru log]# cat /proc/interrupts
CPU0

  0:      57278          XT-PIC  timer
  1:       2658          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  4:      49530          XT-PIC  serial
  5:          1          XT-PIC  soundblaster
 10:         15          XT-PIC  aha152x
 11:         60          XT-PIC  eth0
 12:      27772          XT-PIC  PS/2 Mouse
 14:     213118          XT-PIC  ide0
 15:       3298          XT-PIC  ide1
NMI:          0 
LOC:          0 
ERR:          0

Have a nice day,
Juraj.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw

Hi!

Quoted 17 lines

I just found a strange thing in 2.4.1 (don't know, if the same
occured in 2.4.0) and 2.4.1-ac3. When I enable ACPI, my serial port starts to drop some characters. When making ppp over this and doing ping, it causes great packet losts. If I turn ACPI in this configuration off, it works with no problems. I tried to switch serial port IRQ to other one (was 4, switched to 3 and tested) and it didn't help. Maybe something's broken.

ACPI related boot messages:

Feb  4 23:21:58 idoru kernel: ACPI: Core Subsystem version [20010125]
Feb  4 23:21:58 idoru kernel: ACPI: Subsystem enabled
Feb  4 23:21:58 idoru kernel: ACPI: System firmware supports: C2 C3
Feb  4 23:21:58 idoru kernel: ACPI: System firmware supports: S0 S1 S4 S5

[root@idoru log]# cat /proc/interrupts
CPU0

Quoted 13 lines
  0:      57278          XT-PIC  timer
  1:       2658          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  4:      49530          XT-PIC  serial
  5:          1          XT-PIC  soundblaster
 10:         15          XT-PIC  aha152x
 11:         60          XT-PIC  eth0
 12:      27772          XT-PIC  PS/2 Mouse
 14:     213118          XT-PIC  ide0
 15:       3298          XT-PIC  ide1
NMI:          0 
LOC:          0 
ERR:          0

ACPI slows down CPU quite a lot. Maybe cpu is so slow it can no longer handle serial in time?

Try running

while(1);

program while doing serial transfers.
Pavel

Signature · 6 lines
I'm [email protected]. "In my country we have almost anarchy and I don't care."
Panos Katsaloulis describing me w.r.t. patents at [email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/