Skip to contentSkip to conversation

Ioctl CDROMRESET has no effect

DISCUSSION Paul Powell 2 participants 2 messages Feb 7, 2001

lore
Share & tools
lore
#0 lore raw

I'm attempting to reset a CDROM using the CDROMRESET ioctl. The reset command only seems to reset the device if the device is not mounted. If the device is mounted, the reset command seems to have no effect.

With the device unmounted, sending the reset command causes the drive to become active and I see the activity light light up. With the device mounted, the activity light does nothing. I also can't open the CD-ROM drive using the eject button after resetting a mounted CD.

It seems the reset command should work even if the OS thinks the device is mounted for error recovery.

Here is my test program:

#include <stdio.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <linux/cdrom.h>

int main(int argc, char* argv[])
{
int fd, result;

   fd = open("/dev/hda", O_RDONLY|O_NONBLOCK);
   if (fd < 0)
   {
      perror("open");
      return fd;
   }   
   
   result = ioctl(fd, CDROMRESET, 1);
   if (result < 0)
      perror("ioctl");

close(fd);
return 0;
}

__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - Buy the things you want at great prices.
http://auctions.yahoo.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw
Quoted 12 lines · Paul Powell

I'm attempting to reset a CDROM using the CDROMRESET ioctl. The reset command only seems to reset the device if the device is not mounted. If the device is mounted, the reset command seems to have no effect.

With the device unmounted, sending the reset command causes the drive to become active and I see the activity light light up. With the device mounted, the activity light does nothing. I also can't open the CD-ROM drive using the eject button after resetting a mounted CD.

Quoted 2 lines

It seems the reset command should work even if the OS thinks the device is mounted for error recovery.

There's no special code to send different reset depending on whether the drive is mounted or not. If you drive reacts differently to a reset if it's locked, then tough luck.

Quoted 1 line
   result = ioctl(fd, CDROMRESET, 1);
                                    ^^

There are no valid parameters for a reset.

Signature · 6 lines
Jens Axboe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/