Skip to contentSkip to conversation

doing RAID 0 with HPT370

DISCUSSION Bradley Kite 5 participants 5 messages Feb 15, 2001

lore
Share & tools
lore
#0 lore raw

I'm new to this list so I'd like to say hi first :-)

I found this message while searching for a solution to getting linux to see a raid array on my HPT370:

http://www.mailgate.org/linux/linux.dev.raid/msg00163.html

Its got someone from highpoint saying that raid support will be offered "in the near future", and that message was dated October 2000.

I emailed highpoint to ask if they had got any where, but they dont seem to reply.

Does any one know if highpoint are in fact developing a linux driver that supports the RAID functions of this chip? and if so, are we looking at weeks/months/years before it might be ready?

ps: hedricks ide patch doesnt support the RAID functions of the chip,
otherwise I would have been happy to use that! :-)

Many thanks

--
Brad.

#1 lore raw
Quoted 11 lines · Bradley Kite

I found this message while searching for a solution to getting linux to see a raid array on my HPT370:

http://www.mailgate.org/linux/linux.dev.raid/msg00163.html

Its got someone from highpoint saying that raid support will be offered "in the near future", and that message was dated October 2000.

I emailed highpoint to ask if they had got any where, but they dont seem to reply.

I've emailed them myself as this is the 2nd board I have with the HPT370 controller on it. HighPoint has not returned any of the 4 messages I've sent to them in the last 3 months. I don't know what their plans are but I do know I get the feeling they don't care to support Linux in any way shape or form. Feels like a pawn off job.

Signature · 3 lines
David D.W. Downey - RHCE
Consulting Engineer
Ensim Corporation - Sunnyvale, CA
#2 lore raw
Quoted 2 lines

do know I get the feeling they don't care to support Linux in any way shape or form. Feels like a pawn off job.

afaik, there's no hardware raid support in the chip - it's just another dual-channel controller, with some raid0 (perhaps raid1) software in bios. I think Andre has said that he has hopes of getting docs on HPT's on-disk raid layout - but this is a software thing, and all it would give us is interoperability with that other OS.

#3 lore raw

NFS mounting delays w/ 2.4.x kernel?

In reply to Bradley Kite

I've seen reference to this before (I think on this list) but didn't pay attention to them
at the time. I am now running into this problem myself. I've just upgraded one of my NFS
servers here from 2.2.17 -> 2.4.1 ).

I'm running the user-space server nfs-server-2.2beta48 (tried beta47 as well). Current
versions of mount, et al. When booting I get the following errors:

---------------------------
Mounted devfs on /dev
Trying to unmount old root ... okay
Freeing unused kernel memory: 228k freed Adding Swap: 1048568k swap-space (priority -1)
portmap: server localhost not responding, timed out
portmap: server localhost not responding, timed out
lockd_up: makesock failed, error=-5
portmap: server localhost not responding, timed out
-----------------------------

Which pauses the boot process by about 3 minutes. Everything mounts fine but there is
the pause. Doing a tcpump I see:

18:34:39.445211 192.168.2.18.931 > 192.168.2.26.827: udp 60 (DF) 18:34:39.445428 192.168.2.26.829 > 192.168.2.18.111: udp 56 (DF) 18:34:39.446396 192.168.2.18.111 > 192.168.2.26.829: udp 28 (DF) 18:34:39.446764 192.168.2.26.2114226 > 192.168.2.18.2049: 96 getattr [|nfs] (DF)
18:34:39.447682 192.168.2.18.2049 > 192.168.2.26.2114226: reply ok 96 getattr [|nfs] (DF)
18:34:39.447894 192.168.2.26.18891442 > 192.168.2.18.2049: 96 statfs [|nfs] (DF)
18:34:39.448528 192.168.2.18.2049 > 192.168.2.26.18891442: reply ok 48 statfs [|nfs] (DF)

(192.168.2.18 - nfs exporter, 192.168.2.26 the system that was upgraded the one trying to
mount the exported volume).

When I don't change anything but boot the older 2.2.17 kernel the system starts right up.
I don't see anything that would be causing this. Attached is the configuration for the kernel I'm
running. I use menuconfig to configure the system (if that makes a
difference) and compile
kernels monolithic.

Does anyone have any ideas?

--------------
CONFIG_X86=y
CONFIG_ISA=y
CONFIG_UID16=y
CONFIG_EXPERIMENTAL=y
CONFIG_MPENTIUMIII=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_NET=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_PNP=y
CONFIG_ISAPNP=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
CONFIG_BLK_DEV_LVM=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_SYN_COOKIES=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_SR_EXTRA_DEVS=2
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_OMIT_FLASHPOINT=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_DE4X5=y
CONFIG_EEPRO100=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_NVRAM=y
CONFIG_RTC=y
CONFIG_QUOTA=y
CONFIG_ISO9660_FS=y
CONFIG_MINIX_FS=y
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
CONFIG_DEVPTS_FS=y
CONFIG_EXT2_FS=y
CONFIG_NFS_FS=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_MSDOS_PARTITION=y
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
--------------------

#4 lore raw

Re: NFS mounting delays w/ 2.4.x kernel?

In reply to Bradley Kite
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

" " == List User <[email protected]> writes:

> I've seen reference to this before (I think on this list) but > didn't pay attention to them at the time. I am now running > into this problem myself. I've just upgraded one of my NFS > servers here from 2.2.17 -> 2.4.1 ).

> I'm running the user-space server nfs-server-2.2beta48 (tried > beta47 as well). Current versions of mount, et al. When > booting I get the following errors:

> --------------------------- Mounted devfs on /dev Trying to > unmount old root ... okay Freeing unused kernel memory: 228k > freed Adding Swap: 1048568k swap-space (priority -1) portmap:
> server localhost not responding, timed out portmap: server > localhost not responding, timed out lockd_up: makesock failed, > error=-5 portmap: server localhost not responding, timed out > -----------------------------

You need to add 'nolock' to your mount options. Unfsd doesn't support NLM locking, and it's causing the lockd daemon to be started (which again requires the portmapper to be installed etc.).

Cheers,
Trond