Skip to contentSkip to conversation

AIC7xxx oops with justin gibbs patch on 2.4.1 alpha noritake

DISCUSSION Wakko Warner 1 participant 1 message Feb 18, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 8 lines

There is one bug that might affect the Alpha in there. Once you have patched your kernel, you should change the typedef of bus_addr_t in drivers/scsi/aic7xxx/aic7xxx_osm.h from uint32_t to dma_addr_t:

typedef uint32_t bus_addr_t

becomes

Quoted 7 lines

typedef dma_addr_t bus_addr_t

I just noticed this today while testing an IA64 system (Compaq still hasn't shipped us our Alpha) and it will be fixed in 6.1.2. 6.1.2 will probably release on Friday.

Please let me know how this works for you.

Justin, subject says it all. here's the oops I get (only does it with the adaptec card, nothing else) See details at very bottom

Decoded Oops:
ksymoops 2.3.4 on alpha 2.4.1. Options used

     -v /241-aic7xxx (specified)
     -K (specified)
     -L (specified)
     -o /lib/modules/2.4.1-aic7xxx (specified)
     -m /boot/System.map-2.4.1-aic7xxx (specified)

No modules in ksyms, skipping objects

Unable to handle kernel paging request at virtual address 003ffc0000156000
pc = [<fffffc000031b880>]  ra = [<fffffc000031c3a8>]  ps = 0007
Using defaults from ksymoops -t elf64-alpha -a alpha
v0 = 0000000000000001  t0 = 003ffc0000156000  t1 = 003ffc0000156000
t2 = 0000000040000000  t3 = 0000000000c5efff  t4 = 0000000000c5afff
t5 = fffffc0000156000  t6 = 0000000000000007  t7 = fffffc000837c000
s0 = 0000000000000001  s1 = 0000000000002000  s2 = fffffc000827d0c0
s3 = fffffc0000156080  s4 = 0000000000c5efff  s5 = 0000000000c49000
s6 = fffffc000827d280
a0 = fffffc0000156080  a1 = 0007fffffffffc00  a2 = 0000000000000002
a3 = 0000000000000000  a4 = 0000000000000000  a5 = 00000000000000ff
t8 = 0000000000000000  t9 = fffffc00004b69a8  t10= fffffc00004b6480
t11= 0000000000003fff  pv = fffffc000031c280  at = fffffc00004b77f0
gp = fffffc00004b5508  sp = fffffc000837faa8
Code: 42220642 e4200008 47e20401 2fe00000 47ff041f 2fe00000 <b7e10000> 42403532
Quoted 1 line
Quoted 1 line

PC; fffffc000031b880 <iommu_arena_free+20/40> <=====

Code; fffffc000031b868 <iommu_arena_free+8/40>
0000000000000000 <_PC>:
Code; fffffc000031b868 <iommu_arena_free+8/40>
0: 42 06 22 42 s8addq a1,t1,t1
Code; fffffc000031b86c <iommu_arena_free+c/40>
4: 08 00 20 e4 beq t0,28 <_PC+0x28> fffffc000031b890 <iommu_arena_free+30/40>
Code; fffffc000031b870 <iommu_arena_free+10/40>
8: 01 04 e2 47 mov t1,t0
Code; fffffc000031b874 <iommu_arena_free+14/40>
c: 00 00 e0 2f unop
Code; fffffc000031b878 <iommu_arena_free+18/40>
10: 1f 04 ff 47 nop
Code; fffffc000031b87c <iommu_arena_free+1c/40>
14: 00 00 e0 2f unop
Code; fffffc000031b880 <iommu_arena_free+20/40> <=====
18: 00 00 e1 b7 stq zero,0(t0) <=====
Code; fffffc000031b884 <iommu_arena_free+24/40>
1c: 32 35 40 42 subq a2,0x1,a2

Here's the dmesg when it happened (I took this via serial console which I was logged in to)
[root@kakarot:/lvm/misc] cp /dev/zero .
(scsi1:A:2:0): data overrun detected in Data-out phase. Tag == 0x33. (scsi1:A:2:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:0:0): data overrun detected in Data-out phase. Tag == 0x35. (scsi1:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:1:0): data overrun detected in Data-out phase. Tag == 0x34. (scsi1:A:1:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:1:0): data overrun detected in Data-out phase. Tag == 0x30. (scsi1:A:1:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:2:0): data overrun detected in Data-out phase. Tag == 0x32. (scsi1:A:2:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:0:0): data overrun detected in Data-out phase. Tag == 0x31. (scsi1:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:2:0): data overrun detected in Data-out phase. Tag == 0x3e. (scsi1:A:2:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:1:0): data overrun detected in Data-out phase. Tag == 0x3f. (scsi1:A:1:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:2:0): data overrun detected in Data-out phase. Tag == 0x3a. (scsi1:A:2:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:1:0): data overrun detected in Data-out phase. Tag == 0x3b. (scsi1:A:1:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:0:0): data overrun detected in Data-out phase. Tag == 0x3d. (scsi1:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:2:0): data overrun detected in Data-out phase. Tag == 0x39. (scsi1:A:2:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:1:0): data overrun detected in Data-out phase. Tag == 0x47. (scsi1:A:1:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:2:0): data overrun detected in Data-out phase. Tag == 0x45. (scsi1:A:2:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:0:0): data overrun detected in Data-out phase. Tag == 0x3c. (scsi1:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:1:0): data overrun detected in Data-out phase. Tag == 0x46. (scsi1:A:1:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:0:0): data overrun detected in Data-out phase. Tag == 0x38. (scsi1:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:2:0): data overrun detected in Data-out phase. Tag == 0x41. (scsi1:A:2:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:1:0): data overrun detected in Data-out phase. Tag == 0x42. (scsi1:A:1:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:2:0): data overrun detected in Data-out phase. Tag == 0x40. (scsi1:A:2:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:0:0): data overrun detected in Data-out phase. Tag == 0x44. (scsi1:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:1:0): data overrun detected in Data-out phase. Tag == 0x4e. (scsi1:A:1:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:2:0): data overrun detected in Data-out phase. Tag == 0x4c. (scsi1:A:2:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:0:0): data overrun detected in Data-out phase. Tag == 0x43. (scsi1:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:1:0): data overrun detected in Data-out phase. Tag == 0x4d. (scsi1:A:1:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:0:0): data overrun detected in Data-out phase. Tag == 0x4f. (scsi1:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:2:0): data overrun detected in Data-out phase. Tag == 0x48. (scsi1:A:2:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:1:0): data overrun detected in Data-out phase. Tag == 0x49. (scsi1:A:1:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:0:0): data overrun detected in Data-out phase. Tag == 0x4b. (scsi1:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:1:0): data overrun detected in Data-out phase. Tag == 0x56. (scsi1:A:1:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:0:0): data overrun detected in Data-out phase. Tag == 0x4a. (scsi1:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:0:0): data overrun detected in Data-out phase. Tag == 0x5. (scsi1:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:2:0): data overrun detected in Data-out phase. Tag == 0x3. (scsi1:A:2:0): Have seen Data Phase. Length = 0. NumSGs = 0. NORITAKE APECS machine check: vector=0x660 pc=0xfffffc0000328b2c code=0x100000208 machine check type: MCHK_K_DCSR (retryable)
pc = [<fffffc0000328b2c>] ra = [<fffffc0000310c64>] ps = 0000

v0 = 0000000000000007  t0 = 0000000000000000  t1 = fffffffffffffffe
t2 = 0000000000000001  t3 = 0000000100000000  t4 = fffffc00004d4a18
t5 = fffffc0000156000  t6 = 0000000000000000  t7 = fffffc0008648000
a0 = 0000000000000000  a1 = 0000000010060000  a2 = 0000000000016000
a3 = 0000000000000000  a4 = fffffc000864bce0  a5 = 0000000000000000
t8 = 0000000000000004  t9 = 0000000000000070  t10= 0000000000000384
t11= fffffc0005fd5c00  pv = fffffc0000328aa0  at = 0000000000000000
gp = fffffc00004b5508  sp = fffffc000864b570

scsi1: PCI error Interrupt at seqaddr = 0x7c
scsi1: Received a Target Abort
apecs.c:conf_write: got stat0=802e4018
scsi1:0:0:0: Attempting to queue an ABORT message
scsi1: PCI error Interrupt at seqaddr = 0x7c
scsi1: Received a Target Abort

Unable to handle kernel paging request at virtual address 003ffc0000156000
scsi_eh_1(221): Oops 1
pc = [<fffffc000031b880>]  ra = [<fffffc000031c3a8>]  ps = 0007
v0 = 0000000000000001  t0 = 003ffc0000156000  t1 = 003ffc0000156000
t2 = 0000000040000000  t3 = 0000000000c5efff  t4 = 0000000000c5afff
t5 = fffffc0000156000  t6 = 0000000000000007  t7 = fffffc000837c000
s0 = 0000000000000001  s1 = 0000000000002000  s2 = fffffc000827d0c0
s3 = fffffc0000156080  s4 = 0000000000c5efff  s5 = 0000000000c49000
s6 = fffffc000827d280
a0 = fffffc0000156080  a1 = 0007fffffffffc00  a2 = 0000000000000002
a3 = 0000000000000000  a4 = 0000000000000000  a5 = 00000000000000ff
t8 = 0000000000000000  t9 = fffffc00004b69a8  t10= fffffc00004b6480
t11= 0000000000003fff  pv = fffffc000031c280  at = fffffc00004b77f0
gp = fffffc00004b5508  sp = fffffc000837faa8
Code: 42220642  s8addq a1,t1,t1
 e4200008  blt t0,.+36
 47e20401  or zero,t1,t0
 2fe00000  ldq_u zero,0(v0)
 47ff041f  or zero,zero,zero
 2fe00000  ldq_u zero,0(v0)

*b7e10000 stq zero,0(t0)
42403532 subq a2,1,a2

Trace:31a4ac 3be73c 3bf10c 3bfa78 310610 3bf900

Debian GNU/Linux 2.2 kakarot ttyS0
s3 = fffffc0000156080 s4 = 0000000000c5efff s5 = 0000000000c49000 s6 = fffffc000827d280

a0 = fffffc0000156080  a1 = 0007fffffffffc00  a2 = 0000000000000002
a3 = 0000000000000000  a4 = 0000000000000000  a5 = 00000000000000ff
t8 = 0000000000000000  t9 = fffffc00004b69a8  t10= fffffc00004b6480
t11= 0000000000003fff  pv = fffffc000031c280  at = fffffc00004b77f0
gp = fffffc00004b5508  sp = fffffc000837faa8
Code: 42220642  s8addq a1,t1,t1
 e4200008  blt t0,.+36
 47e20401  or zero,t1,t0
 2fe00000  ldq_u zero,0(v0)
 47ff041f  or zero,zero,zero
 2fe00000  ldq_u zero,0(v0)

*b7e10000 stq zero,0(t0)
42403532 subq a2,1,a2

Trace:31a4ac 3be73c 3bf10c 3bfa78 310610 3bf900

Debian GNU/Linux 2.2 kakarot ttyS0

kakarot login: == 0x4f.
(scsi1:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:2:0): data overrun detected in Data-out phase. Tag == 0x48. (scsi1:A:2:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:1:0): data overrun detected in Data-out phase. Tag == 0x49. (scsi1:A:1:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:0:0): data overrun detected in Data-out phase. Tag == 0x4b. (scsi1:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:1:0): data overrun detected in Data-out phase. Tag == 0x56. (scsi1:A:1:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:0:0): data overrun detected in Data-out phase. Tag == 0x4a. (scsi1:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:0:0): data overrun detected in Data-out phase. Tag == 0x5. (scsi1:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. (scsi1:A:2:0): data overrun detected in Data-out phase. Tag == 0x3. (scsi1:A:2:0): Have seen Data Phase. Length = 0. NumSGs = 0. NORITAKE APECS machine check: vector=0x660 pc=0xfffffc0000328b2c code=0x10000020 8
machine check type: MCHK_K_DCSR (retryable)
pc = [<fffffc0000328b2c>] ra = [<fffffc0000310c64>] ps = 0000

v0 = 0000000000000007  t0 = 0000000000000000  t1 = fffffffffffffffe
t2 = 0000000000000001  t3 = 0000000100000000  t4 = fffffc00004d4a18
t5 = fffffc0000156000  t6 = 0000000000000000  t7 = fffffc0008648000
a0 = 0000000000000000  a1 = 0000000010060000  a2 = 0000000000016000
a3 = 0000000000000000  a4 = fffffc000864bce0  a5 = 0000000000000000
t8 = 0000000000000004  t9 = 0000000000000070  t10= 0000000000000384
t11= fffffc0005fd5c00  pv = fffffc0000328aa0  at = 0000000000000000
gp = fffffc00004b5508  sp = fffffc000864b570

scsi1: PCI error Interrupt at seqaddr = 0x7c
scsi1: Received a Target Abort
apecs.c:conf_write: got stat0=802e4018
scsi1:0:0:0: Attempting to queue an ABORT message
scsi1: PCI error Interrupt at seqaddr = 0x7c
scsi1: Received a Target Abort

Unable to handle kernel paging request at virtual address 003ffc0000156000
scsi_eh_1(221): Oops 1
pc = [<fffffc000031b880>]  ra = [<fffffc000031c3a8>]  ps = 0007
v0 = 0000000000000001  t0 = 003ffc0000156000  t1 = 003ffc0000156000
t2 = 0000000040000000  t3 = 0000000000c5efff  t4 = 0000000000c5afff
t5 = fffffc0000156000  t6 = 0000000000000007  t7 = fffffc000837c000
s0 = 0000000000000001  s1 = 0000000000002000  s2 = fffffc000827d0c0
s3 = fffffc0000156080  s4 = 0000000000c5efff  s5 = 0000000000c49000
s6 = fffffc000827d280
a0 = fffffc0000156080  a1 = 0007fffffffffc00  a2 = 0000000000000002
a3 = 0000000000000000  a4 = 0000000000000000  a5 = 00000000000000ff
t8 = 0000000000000000  t9 = fffffc00004b69a8  t10= fffffc00004b6480
t11= 0000000000003fff  pv = fffffc000031c280  at = fffffc00004b77f0
gp = fffffc00004b5508  sp = fffffc000837faa8
Code: 42220642  s8addq a1,t1,t1
 e4200008  blt t0,.+36
 47e20401  or zero,t1,t0
 2fe00000  ldq_u zero,0(v0)
 47ff041f  or zero,zero,zero
 2fe00000  ldq_u zero,0(v0)

*b7e10000 stq zero,0(t0)
42403532 subq a2,1,a2

Trace:31a4ac 3be73c 3bf10c 3bfa78 310610 3bf900

Debian GNU/Linux 2.2 kakarot ttyS0

kakarot login:

Quoted 1 line

From the looks of it, it logged me out. the 2nd oops I caused with the

sysrq-s. As you can see, I copied /dev/zero to a disk. That disk is reiserfs ontop of LVM striping across 3 disks. 2.4.1 using the builtin qlogic controller appears to be solid (had a 10 day uptime or so when I shut it down. before with the reiserfs patch it would crash every 3-4 days w/o usage). what's strange is the fact that once the disk is full it then crashes. Last time I tried this, after the system came back up I noticed that there were 0 bytes left on the drive (well 1995kb, but I couldn't write anything, I think that's a reiserfs bug, not sure)

Anything else, email me back

Signature · 1 line
 Lab tests show that use of micro$oft causes cancer in lab animals