Skip to contentSkip to conversation

Proliant hangs with 2.4 but works with 2.2.

DISCUSSION Trevor Hemsley 1 participant 1 message Feb 19, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 9 lines · lafanga lafanga

I have a Compaq Proliant 1600 server which can be hung on demand with all the 2.4 series kernels I have tried (2.4, 2.4.1 & 2.4.2-pre3). Kernel 2.2.16 runs perfectly (from a default RH7.0).

I have ensured that the server meets the necessary requirements for the 2.4 kernels (modutils etc) and I have tried kgcc and various gcc versions. When compiling I have tried default configs and also minimalist configs (with only cpqarray and tlan). I have also ensured that I have the latest current SmartStart CD (4.9) and have setup the firmware for installing Linux.

If you cat /proc/ioports does cpqarray show any registered ioports? I think it has a bug that means it doesn't request_region() for the ioports it uses and this means that any other driver that tries to auto-detect hardware by probing ports can stomp on its toes. This is certainly the case for EISA cpqarray controllers which is where I found this. I sent a report into [email protected] or whatever the address listed in the maintainers file is but haven't heard anything. This bug _may_ only exist for EISA controllers - I couldn't test the PCI version since the only machine I have with one in is running that other o/s.

Signature · 2 lines
Trevor Hemsley, Brighton, UK.
[email protected]