CS4232 sound questions
I have come to the pont of having to mail this list in search of a greater understanding of what I could possibably be doing wrong in reguards to enabling my sound card. Under 2.2.X I was able to include the cards configuration during the config, yes, I understand that this has changed in opt for other methods. These methods though are very strange and somewhat unclear in the current documentation set. I have tried several possible built-in and modular configs with the results being the same, below I will include information that may or may not be what is necessary to get possible solutions to this, but odd or exact suggestions will be greatly appreciated. Thank you, Phil Smith
The mother board is a pr440fx intel board.
Dual ppro 200 cpus
Linux version 2.4.1 (root@gezr) (gcc version 2.95.3 20010125 (prerelease)) #8 SMP Thu Feb 22 17:44:42 CST 2001
dmesg information concerning the card
PCI->APIC IRQ transform: (B0,I17,P0) -> 18
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
isapnp: Scanning for Pnp cards...
isapnp: Card 'CS4236B Audio'
isapnp: 1 Plug & Play card detected total
ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
lilo config line (kernel boot parameter?)
append="cs4232=0x534,5,0,3,0x330,9"
14 sound shows in /proc/devices
initial lines from /proc/isapnp (all sound card coresponding devices
show as "not active" activation can be achieved via isapnptools and no sound working from that):
Card 1 'CSC0b35:CS4236B Audio' PnP version 1.0 Product version 0.1
Logical device 0 'CSC0000:WSS/SB'
Device is not active
Resources 0
Priority preferred
Port 0x534-0x534, align 0x3, size 0x4, 16-bit address decoding
P.S. I perfer to not use modules for sound, that may be odd, I'm not sure about that, but I see no reason why what I have chosen to use, not to work, I can only hope that I have missed an important note somewhere and a simple answer will raise its head.
Hi
...maybe it is a bit off-topic here, sorry guys! Phil, you better asked this Q on comp.os.linux.hardware / setup / whatever, am I right?
I got this card working fine with 2.4.x. Currently configured as modules, I even managed to get them to autoload. Looks like you (also) are using OSS. So, will try to recap main points of my configuration (that box is at home):
in .config sound, OSS, CS4232, OPL3 - all as modules (to produce sound.o, soundcore.o, cs4232.0, ad1848.o, uart401.o, opl3.o - I think)
Although in .config I DO have PnP enabled, I am still running isapnp on startup (perhaps I don't need to do that, do I?)
in modules.conf
alias char-major-14 cs4232
pre-install cs4232 modprobe "-k" sound
post-install cs4232 modprobe "-k" opl3
options cs4232 ... (IO, dma, IRQ,...)
I think, this is it. May be I confused something above - but you should be able to guess what I meant:-) If not - I'll send you the exact config. lines from home.
HTH
Guennadi
Quoted 58 lines · Phil Smith
I have come to the pont of having to mail this list in search of a greater understanding of what I could possibably be doing wrong in reguards to enabling my sound card. Under 2.2.X I was able to include the cards configuration during the config, yes, I understand that this has changed in opt for other methods. These methods though are very strange and somewhat unclear in the current documentation set. I have tried several possible built-in and modular configs with the results being the same, below I will include information that may or may not be what is necessary to get possible solutions to this, but odd or exact suggestions will be greatly appreciated. Thank you, Phil Smith
The mother board is a pr440fx intel board.
Dual ppro 200 cpus
Linux version 2.4.1 (root@gezr) (gcc version 2.95.3 20010125 (prerelease)) #8 SMP Thu Feb 22 17:44:42 CST 2001dmesg information concerning the card
PCI->APICIRQ transform: (B0,I17,P0) -> 18
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
isapnp: Scanning for Pnp cards...
isapnp: Card 'CS4236B Audio'
isapnp: 1 Plug & Play card detected totalad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
lilo config line (kernel boot parameter?)
append="cs4232=0x534,5,0,3,0x330,9"14 sound shows in
/proc/devicesinitial lines from
/proc/isapnp(all sound card coresponding devices
show as "not active" activation can be achieved via isapnptools and no sound working from that):Card 1 'CSC0b35:CS4236B Audio' PnP version 1.0 Product version 0.1
Logical device 0 'CSC0000:WSS/SB'
Device is not active
Resources 0
Priority preferred
Port 0x534-0x534, align0x3, size0x4, 16-bit address decoding
P.S. I perfer to not use modules for sound, that may be odd, I'm not sure about that, but I see no reason why what I have chosen to use, not to work, I can only hope that I have missed an important note somewhere and a simple answer will raise its head.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: CS4232 sound update
In reply to Phil SmithWith the removal of the pnp selection, it worked, answered in another post to another topic, the 3c509 sb issue, almost as if isapnp is grabing the card its self and holding on in some way. Thank you Phil