2.42 broke PCMCIA IDE
Hello,
Just installed a custom Debian system using kernel 2.4.1 + ReiserFS (root running reiserfs) and it works just fine. Since kernel 2.4.2 has been released, when recompiling a new kernel (the 2.4.1 I used has been trimmed to fit my modified boot disks) I used that instead, after hearing about the multimode and reiserfs bugs.
Kernel boots, and... pcmcia-cs starts with a high and low beep. Card detected as a 5V using cardctl status, but silly me, forgot to note the reading given by cardctl ident.
Running Debian woody, 02/18 snapshot, using gcc 2.95.3. Hardware is the Sony Picturebook C1VE (Crusoe)
Any idea?
Cheers,
Michel
____________________________________________________________
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie
Quoted 4 lines · In article <[email protected]> you wrote:
Kernel boots, and... pcmcia-cs starts with a high and low beep. Card detected as a 5V using cardctl status, but silly me, forgot to note the reading given by cardctl ident.
Make sure your /etc/pcmcia scripts list the driver as "ide-cs" not "ide_cs". The module is called like that for a while now, and you might have had an old symlink lying around from 2.4.1
Greetings,
Arjan van de Ven