CPU name for "pure" i386 missing
Looks like every time the CPU detection code is rewritten, the printing of the CPU name for "pure" (i.e. "original") 386s suffer. Last time, the "\n" after the "CPU: 386" line was missing.
This time it's worse. It's tripping the "unknown CPU" code path:
CPU: Before vendor init, caps: 00000000 00000000 00000000, vendor = 255 [...]
CPU: ff/00
and looking at /proc/cpuinfo:
processor : 0vendor_id : unknown
cpu family : 3
model : 0
model name : ff/00
stepping : unknownfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : nofpu_exception : no
cpuid level : -1
wp : no
flags :
bogomips : 3.62
Shouldn't the code be supposed to figure that, since there is no cpuid, it should be a 386 or an early 486?
I think that table_lookup_model in arch/i386/kernel/setup.c should code a vendor of 255 as a special case and return "386" or something like that instead of bailing out. If everybody agrees, I'll make a patch for Linus.
Signature · 3 lines
Cesar Eduardo Barros [email protected] [email protected]
I've made a patch to fix the problem. I've not even compiled it yet (I might do it later).
arch/i386/kernel/setup.c +9 -0
@@ -1996,6 +1996,15 @@case X86_VENDOR_UNKNOWN :default :/* Not much we can do here... */ +/* Check if at least it has cpuid */ +if (c->cpuid_level ==-1 ) + { +/* No cpuid. It must be an ancient CPU */ +if (c->x86 ==4 ) +strcpy (c->x86_model_id,"486" ); +else if (c->x86 ==3 ) +strcpy (c->x86_model_id,"386" ); + }break ;case X86_VENDOR_CYRIX :
Signature · 3 lines
Cesar Eduardo Barros [email protected] [email protected]