tts/0: 1 input overrun(s)
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 6 lines · James Stevenson
with the serial port it has a buffer when it recives data the serial port buffer will fill up if data is not read quickly enough the buffer will overflow hence the 1 input overrun
to fix it your could try to reduce the data rate to the serial port and what type of UART do you have in that port ?
I don't think this should be normal.
The relevant dmesg part:
Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
I am using 115200.
Balazs Pozsar.
Quoted 27 lines
Quoted 24 lines
Hi all,
I get the following message:
tts/0: 1 input overrun(s)each time while downloading pictures from my digital camera via ttyS0, _and_ switching between an X session and textmode console. (ie, 1 switch -> 1 error)
This is with 2.4.1. I don't remember getting these with 2.2 This error also means a transmit error (gphoto reports error and a packet has to be retransferred.)
What is this? Why I'm getting it? What should I do? :)
bye,
Balazs Pozsar.-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/