IDE bug in 2.4.2-ac12?
Quoted 3 lines · Vojtech Pavlik
Quoted 1 line · Konrad Stopsack
Quoted 1 line
I don't see any other way how the ZIP could have impact on the IDE
HDD
Quoted 5 lines
Quoted 2 lines
Quoted 1 line
on a different IDE interface.
The 82c586b can be a chip with locked-together IDE controllers, can't
it?
What do you mean by 'locked together'?
Nasty chips whose two IDE channels aren't really separated. On one IDE channel you either can use DMA or not. On these chips, switching off DMA at the second controller also disables DMA at the first.
Quoted 12 lines
Quoted 3 lines
Quoted 3 lines
If you wonder why
/proc/ide/viareports slower DMA rates for the HDD when the ZIP is connected is because the auto slowdown code kicks inand
Quoted 7 lines
Quoted 1 line
lowers the transfer rate when too many CRC errors happen.
Well, and what should I do now? I really need the ZIP drive. Try without CD-ROM? Buy new ATX case with 300W power supply? And new motherboard? And new processor? And ... and ... and?
Isn't there a chance to unlock the IDE channels (if they are locked)? Remember, I've heard about a Windows patch to do this.
Quoted 3 lines
I have two vt82c586b's here and one old vt82c586. All work fine with different drive combinations, one even has a CD-ROM and a ZIP on the secondary channel like yours.
Yeah, Ok. My combination SHOULD work without any problems...
What else could I do? Swap CD-ROM and ZIP? Try new 2.4.2-ac14 with command line parameters "ide0=dma ide1=nodma"?
cu Konrad
Signature · 3 lines
Konrad Stopsack - [email protected] Sent through GMX FreeMail - http://www.gmx.net