JFFS on a powerpc platform.
I still have that problem now its slightly different problem.
It looks like problem with 'interleaving'
This is how my mtd memory space looks like --
cat /proc/mtd
mtd0: 00400000 00020000 "Physically mapped flash"
mtd1: 00080000 00020000 "Bootrom Area"
mtd2: 00040000 00020000 "Custom Flash Bank #2 2x128KB"
mtd3: 00040000 00020000 "Custom Flash Bank #2 2x128KB"
mtd4: 00300000 00020000 "Custom Flash left overs from 4MB Flash"
Now the first device /dev/mtd1 contains the bootrom so I copy /dev/mtd1 to file and it looks like this --
cat < /dev/mtd1 > /tmp/bootrom
'V|~?&tcN |~N MTDSkyStream Bootrom (ver 0.1) (Mar 8 2001 - 10:26:50)
doc_loadbios /dev/mtd4 bootrom
Now if I try to dump the /dev/mtd4 I get following output cat < /dev/mtd4 | more
'&?~|ct N&| NSDTMtSykmaerooB mortev( .0 r( )1 raM2 9 10061 -:52:)44
Now if I do eraseall /dev/mtd0 I see data in flash as
FFFF0080 FFFF0080..
instead of
FFFFFFFF FFFFFFFF...
So it looks like for some reason one of the chip is not getting erased?
In my kernel config as interleave '2' as I have two chips giving me 32 bit access.
CONFIG_MTD_CFI=yCONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_CFI_B1 is not set
# CONFIG_MTD_CFI_B2 is not setCONFIG_MTD_CFI_B4=y
# CONFIG_MTD_CFI_I1 is not setCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not setCONFIG_MTD_CFI_INTELEXT=y
Interleaving factor is '2' as my CPU A1 is connected to A0 of the chip.
Any more hints on why I would be getting this "flipping" of bits?
Thanks!!
/Subodh
To unsubscribe, send "unsubscribe mtd" to [email protected]