Skip to contentSkip to conversation

RIO modemsignals.

PATCH New Rogier Wolff 1 participant 1 message Mar 14, 2001 Char and misc drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 RIO modemsignals.

Hi,

Francois Groenewald noted that the RIO driver under Linux didn't implement the TIOMGET and related IOCTLs. Attached is a patch that fixes this.

Alan, sorry for being so late with this: I was waiting for an "yep it works" from Francois...

Roger.

Signature · 4 lines
** [email protected] ** http://www.BitWizard.nl/ ** +31-15-2137555 **
*-- BitWizard writes Linux device drivers for any device you may have! --*
* There are old pilots, and there are bold pilots. 
* There are also old, bald pilots. 
drivers/char/rio/linux_compat.h +1 -0
diff -ur linux-2.2.18.clean/drivers/char/rio/linux_compat.h linux-2.2.18.rio/drivers/char/rio/linux_compat.h
@@ -93,6 +93,7 @@
 #define RIO_DEBUG_SPINLOCK     0x010000
 #define RIO_DEBUG_DELAY        0x020000
 #define RIO_DEBUG_MOD_COUNT    0x040000
+#define RIO_DEBUG_IOCTL        0x080000
 
 /* Copied over from riowinif.h . This is ugly. The winif file declares
 also much other stuff which is incompatible with the headers from
drivers/char/rio/rio_linux.c +57 -29

122 lines not on this page · raw message

drivers/char/rio/rio_linux.h +17 -0
diff -ur linux-2.2.18.clean/drivers/char/rio/rio_linux.h linux-2.2.18.rio/drivers/char/rio/rio_linux.h
@@ -190,3 +190,20 @@
 #define func_enter2()
 #endif
 
+/* Documentation says to use these defines. Why aren't they in a
+ * header then?  Hmm. They are in the header "riowinif.h", however
+ * that file doesn't compile. I give up. Copied here. -- REW
+ */
+
+#define MSET_RTS        0x01            /* RTS modem signal */
+#define MSET_DTR        0x02            /* DTR modem signal */
+
+#define MODEM_DSR               0x80    /* Data Set Ready modem state */
+#define MODEM_CTS               0x40    /* Clear To Send modem state */
+#define MODEM_RI                0x20    /* Ring Indicate modem state */
+#define MODEM_CD                0x10    /* Carrier Detect modem state */
+#define MODEM_TSTOP             0x08    /* Transmit Stopped state */
+#define MODEM_TEMPTY    0x04    /* Transmit Empty state */
+#define MODEM_DTR               0x02    /* DTR modem output state */
+#define MODEM_RTS               0x01    /* RTS modem output state */
+