SMP on assym. x86
Quoted 9 lines
recently upgrading one of my two CPUs, I found kernel-2.4.2 to be unable to handle the situation with 2 different CPUs (AMP =3D Assymmetric multiprocessing ;-) correctly. Some details on my system:
Dual BX board (DFI P2XBL/D), iPII 350 (Deschutes) + iPIII 850 (Coppermine) Note: The difference in features is the XMM (SSE) flag.The problems are twofold (a) Determination of the correct common features (=3D: COMCAP), i.e.
boot_cpu_data.x86_capaility[0] at the correct time (b) TSC stuff
I have similar problems. I've got a reconfigurable non-APIC 8 way system with (currently) 4 p5-66 and 4 p5-166 processors. I found the answer to (b) was simply to disable the TSC stuff---my processors aren't even guaranteed to be fed from the same clock, so there's no hope for TSC coherency.
I run into your problem (a) when trying a mixture of 486 and 586 processors. The simplest work around I find is just to make sure that the boot CPU has the lowest capability set (i.e. boot off a 486). Could you just swap the order of your processors to achieve the same effect?
James Bottomley