kernel 243p8 problems
Hi,
1st :
# depmod -a 2.4.3-pre8 depmod: *** Unresolved symbols in /lib/modules/2.4.3-pre8/kernel/drivers/net/dummy.o depmod: *** Unresolved symbols in /lib/modules/2.4.3-pre8/kernel/drivers/net/eepro100.o
the rest :
it's Compaq PL 6500 with 4 penguins and 2 gig RAM Compaq SMART2 hardware RAID and DLT are also bundled ! :)
Well, there is a problem with cpqarray driver. If I boot without noapic it hangs right after
cpqarray: Device e11 has been found at 5 0 Compaq SMART2 Driver (v 2.4.2)
Found 1 controller(s)
cpqarray: Finding drives on ida0 (Smart Array 3200) cpqarray ida/c0d0: blksz=512 nr_blks=17764320 cpqarray ida/c0d1: blksz=512 nr_blks=17764320 Partition check:
ida/c0d0
but if I put noapic I get only _one_ CPU usable ->
]# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 926630 0 0 0 XT-PIC timer 1: 11 0 0 0 XT-PIC keyboard 2: 0 0 0 0 XT-PIC cascade 8: 1 0 0 0 XT-PIC rtc 9: 34 0 0 0 XT-PIC sym53c8xx 10: 30 0 0 0 XT-PIC sym53c8xx 11: 2522 0 0 0 XT-PIC ida0 14: 3 0 0 0 XT-PIC ide0 15: 7547 0 0 0 XT-PIC eth1 NMI: 0 0 0 0 LOC: 926548 926547 926546 926545 ERR: 0
any patches to take/patch/slap !?
ps
any other required info available on request
Signature · 2 lines
Mario Mikočević (Mozgy) My favourite FUBAR ...
Quoted 8 lines · Mario Mikocevic
Hi,
1st :
# depmod -a 2.4.3-pre8 depmod: *** Unresolved symbols in /lib/modules/2.4.3-pre8/kernel/drivers/net/dummy.o depmod: *** Unresolved symbols in /lib/modules/2.4.3-pre8/kernel/drivers/net/eepro100.o
What are the unresolved symbols?
Signature · 3 lines
Jeff Garzik | May you have warm words on a cold evening, Building 1024 | a full moon on a dark night, MandrakeSoft | and a smooth road all the way to your door.