AMD PCnet32 driver does not compile on 2.4.x
Hi!
Sorry for the "private" message... I'm testing some machines (real and virtual) under 2.4.3pre8, that have a AMD PCNET32 ethernet driver. This cards works PERFECTLY under 2.2.x, but if I compile 2.4.x, I get a error on pcnet32.c about a function not defined: is_valid_etherdevice().
It seems that you all have changed lots of networking functions on the 2.2 to 2.4 change, but this driver still continues using the old functions.
If i just comment the call to is_valid_etherdevice() (I'll assume the kernel passes a good etherdevice to pcnet32.c :-) the system hangs during boot when loading the pcnet32 module.
If you need more info about this, ask me at this email. Thanks a lot for any help.
Signature · 9 lines
Santiago Romero Departamento de Sistemas [email protected] C/ Primado Reig, 189 entlo 46020 Valencia - Spain Tel. (+34) 96 332 12 00 Fax. (+34) 96 332 12 01 http://www.servicom2000.com
Quoted 5 lines · Santiago Romero
Sorry for the "private" message... I'm testing some machines (real and virtual) under 2.4.3pre8, that have a AMD PCNET32 ethernet driver. This cards works PERFECTLY under 2.2.x, but if I compile 2.4.x, I get a error on
pcnet32.cabout a function not defined:is_valid_etherdevice().
hmmm. I just tested a vanilla 2.4.3-pre8, with the drivers/net/Makefile fix, and I don't see this at all.
Signature · 3 lines
Jeff Garzik | May you have warm words on a cold evening, Building 1024 | a full moon on a dark night, MandrakeSoft | and a smooth road all the way to your door.