Skip to contentSkip to conversation

How can I help with VIA MVP3 problems?

DISCUSSION Peter Rasmussen (udgaard) 1 participant 1 message May 12, 2001

lore
Share & tools
lore
#0 lore raw

I'm not on the list so please also reply directly to me. I may soon be done :-)

I was made aware of the following:

Quoted 10 lines · Peter Rasmussen
Quoted 9 lines

2.4.4-ac8 doing "time make dep clean bzImage modules modules_install" :

udgaard:/usr/src/linux# cat /proc/meminfo
        total:    used:    free:  shared: buffers:  cached:
Mem:  328101888 317947904 10153984        0 67219456 130404352
Swap: 542859264        0 542859264

======================== 2.2.16 ===========================

Quoted 8 lines
Quoted 4 lines
udgaard:~$ cat /proc/meminfo 
        total:    used:    free:  shared: buffers:  cached:
Mem:  65789952 60755968  5033984 28221440  7872512 24219648
Swap: 542859264  1368064 541491200

2.2.16 only recognizes 64 Mb? That makes all of the numbers less interesting, I guess.

I hadn't noticed that before and it helped me improving the test. By ensuring that the two kernels looked at the same size RAM I found that the performance numbers were the same.

However, I then now wonder why my system gets slower when increasing the amount of main RAM?

Is it a RAM caching problem in the chipset or the board similar to the braindead Intel VX430 chipset that couldn't handle more than 64MB? I hope not, but I can't see any other reason, even though I thought such problems were of the past? Please let me know if you know something about it.

I found the following relations with regard to memory settings. As the 2.2 and 2.4 kernels I use performed the same with little RAM (64MB), I stayed with the 2.4.4-ac8 for simplicity's sake.

A 2.4.4-ac8 kernel build:

2.4.4-ac8 with 64MB RAM mem-setting: real    8m26.180s
                                     user    7m5.340s
                                     sys     0m39.430s
2.4.4-ac8 with 128MB RAM mem-setting: real    8m20.902s
                                      user    7m8.810s
                                      sys     0m39.800s
2.4.4-ac8 with 160MB RAM mem-setting: real    8m21.653s
                                      user    7m13.830s
                                      sys     0m37.840s
2.4.4-ac8 with 192MB RAM mem-setting: real    9m48.632s
                                      user    8m39.270s
                                      sys     0m39.740s

So it seems around here the performance starts to decrease.

I am still puzzled why the shared memory like the following is always zero on the 2.4 kernels? All I can remember checking it on has it like that, but I can't find any explanations about it?

udgaard:/usr/src/linux# cat /proc/meminfo
        total:    used:    free:  shared: buffers:  cached:
Mem:  64135168 63148032   987136        0  2965504 34447360
Swap: 542859264   147456 542711808

Thank you very much,

Peter