Skip to contentSkip to conversation

"clock timer configuration lost" on Serverworks chipset

DISCUSSION Jim Castleberry 2 participants 2 messages May 16, 2001 – May 17, 2001

lore
Share & tools
lore
#0 lore raw

I'm getting messages saying "clock timer configuration lost - probably a VIA686a" from 2.2.19 running on a board using the Serverworks HE chipset. Reading the list archives it sounds like this problem has previously been attributed to a possible bug in the VIA chipset.

According to RedHat's bugzilla database, others have seen it on Serverworks chipsets, too. And it sounds like using "noapic" sometimes makes it go away, which doesn't make much sense to me.

How well has the problem been nailed down? Could it be that it just showed up first on VIA and the real cause (and fix) remains to be discovered? Or does Serverworks somehow have an identical bug in their chipset?

jcastle

#1 lore raw
Quoted 4 lines

How well has the problem been nailed down? Could it be that it just showed up first on VIA and the real cause (and fix) remains to be discovered? Or does Serverworks somehow have an identical bug in their chipset?

There is a notional off by one in the check at least by the rules of the original chip which do allow the overflow value to be visible momentarily. Later -ac checks for > not >=