Skip to contentSkip to conversation

eepro100 rev 12 problems

DISCUSSION James Fidell 3 participants 4 messages May 17, 2001

lore
Share & tools
lore
#0 lore raw

I have two eepro100 interfaces in a machine, one rev 8, which works just fine, and another rev 12, which appears as a device when the kernel boots and can be configured with an IP address etc., but I can't get any data in or out of it. All the other hardware looks like it's working fine and all my rev 8 cards work, so I'm led to ask, are there any known problems with eepro100 rev 12 cards under 2.2.18?

James

#1 lore raw
Quoted 6 lines · James Fidell

I have two eepro100 interfaces in a machine, one rev 8, which works just fine, and another rev 12, which appears as a device when the kernel boots and can be configured with an IP address etc., but I can't get any data in or out of it. All the other hardware looks like it's working fine and all my rev 8 cards work, so I'm led to ask, are there any known problems with eepro100 rev 12 cards under 2.2.18?

Is this a real card, or is it built-in on the motherboard?

I don't think eepro100 has got much testing with rev > 9, though it should have worked. All eepro100 chips are supposed to be backwards compatible with the 82557, but maybe our driver initializes some registers in a way that upsets newer chips. Not having docs for the newer chips doesn't help, either...

Intel's own e100 driver probably works, their code does things differently if rev >= 12 (what they call the D102 revision). Give it a spin, I guess.

Ion

Signature · 2 lines
  It is better to keep your mouth shut and be thought a fool,
            than to open it and remove all doubt.
#2 lore raw
In reply to James Fidell
Quoted 9 lines · Ion Badulescu
Quoted 6 lines · James Fidell

I have two eepro100 interfaces in a machine, one rev 8, which works just fine, and another rev 12, which appears as a device when the kernel boots and can be configured with an IP address etc., but I can't get any data in or out of it. All the other hardware looks like it's working fine and all my rev 8 cards work, so I'm led to ask, are there any known problems with eepro100 rev 12 cards under 2.2.18?

Is this a real card, or is it built-in on the motherboard?

It's a real card.

Quoted 8 lines

I don't think eepro100 has got much testing with rev > 9, though it should have worked. All eepro100 chips are supposed to be backwards compatible with the 82557, but maybe our driver initializes some registers in a way that upsets newer chips. Not having docs for the newer chips doesn't help, either...

Intel's own e100 driver probably works, their code does things differently if rev >= 12 (what they call the D102 revision). Give it a spin, I guess.

For various reasons that are far to boring to go into here, I'm not entirely free in my choice of card. What I'll probably do is try to get a rev 8 card swapped in for the rev 12 one. If I can't get a rev 8 card for that machine, I'll go with the e100 driver and let you know what happens.

James

#3 lore raw
Quoted 3 lines · James Fidell
Quoted 1 line

Is this a real card, or is it built-in on the motherboard?

It's a real card.

All right, that's good to know. Maybe I'll get one for myself, so I can test new code on it -- right now I only have rev 9 and earlier cards.

Quoted 4 lines

For various reasons that are far to boring to go into here, I'm not entirely free in my choice of card. What I'll probably do is try to get a rev 8 card swapped in for the rev 12 one. If I can't get a rev 8 card for that machine, I'll go with the e100 driver and let you know what happens.

Yes, and do let us know what happens. Whatever the problem is, it wants fixing sooner than later.

Thanks,
Ion

Signature · 2 lines
  It is better to keep your mouth shut and be thought a fool,
            than to open it and remove all doubt.