Skip to contentSkip to conversation

write to dvd ram

DISCUSSION [email protected] 4 participants 4 messages May 22, 2001 – May 23, 2001

lore
Share & tools
lore
#0 lore raw

OK, I've asked this question four weeks in a row and received no response whatsoever. Linux is supposed to be the OS where you can turn to the newsgroups/IRC and get able help.

This is to those who couldn't lift a finger to help with this compile/driver problem:
Thanks for nothing, you arrogant snots. You don't know how much damage you do.

-------- Original Message --------
Subject: Re: write to dvd ram
Date: Tue, 15 May 2001 10:32:21 -0600
From: @.
To: [email protected]

No one has a minute to help me with this (compile?) problem? Linus ?

-------- Original Message --------
Subject: Re: write to dvd ram
Date: Fri, 11 May 2001 07:57:56 -0600
From: @.
To: [email protected]
In-Reply-To: <91FD33983070D21188A10008C728176C09421202@LDMS6003> <[email protected]> <[email protected]> <[email protected]>

Only udf I could find that was compatible with kernel 2.4.2 was the udf-0.9.3 tarball. It does have a 2.4 directory. I am restricted in which kernel I can use, as I must have a patch for fibrechannel. My compile craps out with the listing below; I can't make any sense out of it.

I have used Linux for several years as my firewall, and in December 2k I decided to make it my workstation. Since that time I have worked on configuring it at least a few hours each workday afternoon. (RedHat Fisher, then Wolverine) Now I am not a dummy, but I'm not a coder either, and I have just not been able to get this system running, and am now up against two problems I cannot solve: this DVDRAM | UDF issue corrupting my disks (Why is udf-0.9.1 in Wolverine, wrecking my DVDRAM data? And how can I install udf as a module when it's already in kernel?), and Wine setup. No one has answered my questions on the kernel IRCs nor Wine mailinglist -- they're fairly cross with newbies who have actually read/followed the docs. Often when I ask a question I get taken down like an elk by a lion. This isn't supposed to be natural selection people. Supposed to =bring= ppl to Linux; don't they know the damage they do to Linux by blowing off their steam? Most newbies won't slap them back down; they'll just go away quietly & then put down Linux to others.

I haven't even yet gotten to learning/configuring Sane, LDAP, Postfix, IPTables, VPN, nor intrusion detection, much less database & production functions.

I just don't know how I'm going to make this work =practically= as much as I want it; RedHat just seems to require unlimited volumes of time. After months I am precisely nowhere, and stuck with Windows, and discouraged; looks like I have at least another year of =configuring= at this rate. --
C.

The best way out is always through.
- Robert Frost A Servant to Servants, 1914

Linux UDF Configuration Script

The default responses for each question are correct for most users.

Linux source directory [/usr/src/linux]: /usr/src/linux-2.4.2-temp Alternate target install directory []: /lib/modules/2.4.2-0.1.49 C compiler name [gcc]:
Linker name [ld -m elf_i386]:
UDF Write Support (y/n) [y]:
Compiler flags for debugging [-g]:

The UDF driver needs to be compiled to match the kernel it will be used with, or it may fail to load. If you are not sure what to do, please consult the UDF manual.

How would you like to set kernel-specific options?
1 - Read from the currently running kernel 2 - Read from the Linux source tree
Enter option (1-2) [1]: 2

Kernel configuration options:
Symmetric multiprocessing support is disabled. Max physical memory in MB is
Advanced Power Management (APM) support is enabled. Networking support is enabled.
Module version checking is enabled.

The kernel source tree is version 2.4.2-0.1.49.
The current kernel build date is Wed Apr 18 20:53:37 MDT 2001.

Your module utilities are version 2.4.2.
make[1]: Entering directory `/usr/send-rec/download/udf-0.9.3/module'
gcc -MD -O2 -Wall -Wstrict-prototypes -pipe -DMODVERSIONS -include /usr/src/linux-2.4.2-temp/include/linux/modversions.h -g -D__KERNEL__ -DMODULE -I../include -I. -I/usr/src/linux-2.4.2-temp/include -DUDFFS_RW=1 -DCONFIG_UDF_FS_EXT -c -o balloc.o ../linux-2.4/balloc.c ../linux-2.4/balloc.c:115:17: warning: pasting "(" and ""block_group (%d) > nr_groups (%d)\n"" does not give a valid preprocessing token
../linux-2.4/balloc.c:160:17: warning: pasting "(" and ""nonexistent device"" does not give a valid preprocessing token
../linux-2.4/balloc.c:168:17: warning: pasting "(" and ""%d < %d || %d + %d > %d\n"" does not give a valid preprocessing token
../linux-2.4/balloc.c:198:25: warning: pasting "(" and ""bit %ld already set\n"" does not give a valid preprocessing token
../linux-2.4/balloc.c:199:25: warning: pasting "(" and ""byte=%2x\n"" does not give a valid preprocessing token
../linux-2.4/balloc.c:203:54: macro "DQUOT_FREE_BLOCK" passed 3 arguments, but takes just 2
../linux-2.4/balloc.c:239:17: warning: pasting "(" and ""nonexistent device\n"" does not give a valid preprocessing token
../linux-2.4/balloc.c:268:59: macro "DQUOT_PREALLOC_BLOCK" passed 3 arguments, but takes just 2
../linux-2.4/balloc.c:272:25: warning: pasting "(" and ""bit already cleared for
block %d\n"" does not give a valid preprocessing token
../linux-2.4/balloc.c:273:54: macro "DQUOT_FREE_BLOCK" passed 3 arguments, but takes just 2
../linux-2.4/balloc.c:310:17: warning: pasting "(" and ""nonexistent device\n""
does not give a valid preprocessing token
../linux-2.4/balloc.c:407:43: macro "DQUOT_ALLOC_BLOCK" passed 3 arguments, but takes just 2
../linux-2.4/balloc.c:420:17: warning: pasting "(" and ""bit already cleared for
block %d\n"" does not give a valid preprocessing token
../linux-2.4/balloc.c:454:9: warning: pasting "(" and ""ino=%ld, bloc=%d, offset
=%d, count=%d\n"" does not give a valid preprocessing token
../linux-2.4/balloc.c:460:17: warning: pasting "(" and ""nonexistent device"" do
es not give a valid preprocessing token
../linux-2.4/balloc.c:471:17: warning: pasting "(" and ""%d < %d || %d + %d > %d
\n"" does not give a valid preprocessing token
../linux-2.4/balloc.c:479:42: macro "DQUOT_FREE_BLOCK" passed 3 arguments, but takes just 2
../linux-2.4/balloc.c: In function `udf_bitmap_free_blocks':
../linux-2.4/balloc.c:203: `DQUOT_FREE_BLOCK' undeclared (first use in this func
tion)
../linux-2.4/balloc.c:203: (Each undeclared identifier is reported only once
../linux-2.4/balloc.c:203: for each function it appears in.)
../linux-2.4/balloc.c: In function `udf_bitmap_prealloc_blocks':
../linux-2.4/balloc.c:268: `DQUOT_PREALLOC_BLOCK' undeclared (first use in this function)
../linux-2.4/balloc.c:273: `DQUOT_FREE_BLOCK' undeclared (first use in this func
tion)
../linux-2.4/balloc.c: In function `udf_bitmap_new_block':
../linux-2.4/balloc.c:407: `DQUOT_ALLOC_BLOCK' undeclared (first use in this fun
ction)
../linux-2.4/balloc.c: In function `udf_table_free_blocks':
../linux-2.4/balloc.c:479: `DQUOT_FREE_BLOCK' undeclared (first use in this func
tion)
../linux-2.4/balloc.c:705:9: warning: pasting "(" and ""ino=%ld, partition=%d, f
irst_block=%d, block_count=%d\n"" does not give a valid preprocessing token
../linux-2.4/balloc.c:711:17: warning: pasting "(" and ""nonexistent device\n""
does not give a valid preprocessing token
../linux-2.4/balloc.c:739:17: warning: pasting "(" and ""eloc=%d, elen=%d, first
_block=%d\n"" does not give a valid preprocessing token
../linux-2.4/balloc.c:772:9: warning: pasting "(" and ""alloc_count=%d\n"" does
not give a valid preprocessing token
../linux-2.4/balloc.c:787:9: warning: pasting "(" and ""ino=%ld, partition=%d, g
oal=%d\n"" does not give a valid preprocessing token
../linux-2.4/balloc.c:794:17: warning: pasting "(" and ""nonexistent device\n""
does not give a valid preprocessing token
../linux-2.4/balloc.c:875:17: warning: pasting "(" and ""cannot get block %d\n""
does not give a valid preprocessing token
make[1]: *** [balloc.o] Error 1
make[1]: Leaving directory `/usr/send-rec/download/udf-0.9.3/module'
make: *** [udf.o] Error 2

Quoted 18 lines · Jens Axboe
Quoted 6 lines · Ben Fennema
Quoted 3 lines

The log is:

Apr 15 20:58:27 hydra kernel: UDF-fs INFO UDF 0.9.1 (2000/02/29) Mounting

volume 'UDF Volume', timestamp 2001/03/02 11:55 (1e98)

At the very least, run 0.9.3 from sourceforce (or the cvs version) and see if it works any better.

I was just about to say the same thing, 0.9.3 works well for me. In fact so well, that I made a patch to bring 2.4.5-pre1 UDF up to date with current CVS earlier this afternoon (hint hint, Ben :-).

*.kernel.org/pub/linux/kernel/people/axboe/patches/2.4.5-pre1/

udf-0.9.3-2.4.5p1-1.bz2

--
Jens Axboe

#1 lore raw
Quoted 6 lines · On Tue, May 22, 2001 at 10:38:49AM -0600, [email protected] wrote:

OK, I've asked this question four weeks in a row and received no response whatsoever. Linux is supposed to be the OS where you can turn to the newsgroups/IRC and get able help.

This is to those who couldn't lift a finger to help with this compile/driver problem:

Ignoring your obvious attitude problem for now (you haven't ever considered the fact that (almost) all the people on this list develop Linux voluntarily, in their spare-time?!), I suggest you try at #kernelnewbies on irc if you want response. Or you could try to download a newer version of the kernel. You know, the bug might've been fixed since v2.4.2...

/David Weinehall
_ _
// David Weinehall <[email protected]> /> Northern lights wander \\

//  Project MCA Linux hacker        //  Dance across the winter sky //
\>  http://www.acc.umu.se/~tao/    </   Full colour fire           </
#2 lore raw
In reply to [email protected]

I tried to give you some pointers in a personal email. So it's not true you didn't receive any response. Also reminded you of the best place to look for info, namely, that driver's mailing list. You don't seem to have made any additional attempts at resolving it yourself since you reposted your original message. Get newer kernel sources, read the driver's documentation more thoroughly.

Signature · 1 line
     Rafael
#3 lore raw
In reply to [email protected]
Quoted 2 lines · [email protected] wrote:

OK, I've asked this question four weeks in a row and received no response whatsoever.

This happens. So what? Nobody _promised_ you anything.

Quoted 1 line

Linux is supposed to be the OS where you can turn to the newsgroups/IRC and get able help.

Linux is the os where you often, but not necessarily will get help form newsgroups and mailinglists. Particularly, try finding the _right_ list.

Quoted 1 line

This is to those who couldn't lift a finger to help with this compile/driver problem:

Why would anyone lift a finger for you? Did _you_ ever help someone? I (and many others) couldn't help because we don't know anything about your driver and havent used UDF. Seek out those few who knows.

Quoted 1 line

Thanks for nothing, you arrogant snots. You don't know how much damage you do.

Damage? Nobody did any damage by not helping you. That's impossible per definition. There are tasks for which linux aren't ready, maybe you found one of them.

Helge Hafting