noapic doesn't quite work as advertised
Hi,
I've got a tyan s2520 motherboard (dual PIII + i840) which is having a problem with APIC errors. I tried running with noapic, but there were still errors, although fewer. Does anyone have any idea what is going on? I'm running 2.4.4 and software raid5, which generates a lot of interrupts.
Here are some of the APIC errors (with noapic):
May 21 12:38:31 rad kernel: APIC error on CPU0: 02(01) May 21 12:42:31 rad kernel: APIC error on CPU0: 01(01) May 21 12:42:31 rad kernel: APIC error on CPU1: 02(02) May 21 12:43:13 rad kernel: APIC error on CPU0: 01(02) May 21 12:43:13 rad kernel: APIC error on CPU1: 02(01) May 21 13:48:19 rad kernel: SCSI disk error : host 3 channel 0 id 0 lun 0 return code = 8000002 May 21 13:48:19 rad kernel: [valid=0] Info fld=0x0, Current sd08:d2: sense key Aborted Command May 21 13:48:19 rad kernel: Additional sense indicates Scsi parity error May 21 13:48:19 rad kernel: I/O error: dev 08:d2, sector 56590336 May 21 13:48:19 rad kernel: interrupting MD-thread pid 1223 May 21 13:48:19 rad kernel: raid5: parity resync was not fully finished, restarting next time.
Here is /proc/interrupts to prove I'm really running with noapic:
CPU0 CPU1
0: 17760464 0 XT-PIC timer 1: 29525 0 XT-PIC keyboard 2: 0 0 XT-PIC cascade 3: 27416165 0 XT-PIC eth1 11: 188276091 0 XT-PIC aic7xxx, aic7xxx, aic7xxx, aic7xxx 12: 413496 0 XT-PIC PS/2 Mouse 14: 1137884 0 XT-PIC ide0 15: 1740847 0 XT-PIC ide1 NMI: 0 0 LOC: 17760053 17759969 ERR: 31
Right now I'm running with noapic and nosmp and so far this seems to be working. I really would like to be able to use the second cpu so any suggestion would be greatly appreciated.