From: Colonel <[email protected]>
To: [email protected]
CC: [email protected]
In-reply-to: <[email protected]>
(message from Luigi Genoni on Wed, 13 Jun 2001 11:32:35 +0200 (CEST))
Subject: Re: your mail
Reply-to: [email protected]
In-Reply-To: <[email protected]>
Date: Wed, 13 Jun 2001 11:32:35 +0200 (CEST)
From: Luigi Genoni <[email protected]>
Cc: <[email protected]>
Content-Type: TEXT/PLAIN; charset=US-ASCII
I have the sound blaster 16 card on one of my athlon (on PIII i have es1731), that has one isa slot on its MB.
It works well, but i do not use isapnp nor any pnp support is enabled inside of the kernel.
running 2.4.5/2.4.6-pre2
Luigi
Yes, dropping any PNP support does resolve the problem. For my installation, I don't need PNP support, so it's OK. The bug is in the communication between the 2 modules.
Quoted 46 lines · Colonel
From: Colonel <[email protected]>
To: [email protected]
Subject: ISA Soundblaster problem
Reply-to: [email protected]The Maintainers list does not contain anyone for 2.4 Soundblaster modules, so perhaps some one on the mailing list is aware of a solution. My ISA Soundblaster 16waveffects worked fine in kernel 2.2 with XMMS. But I have never been successful in a varity of 2.4 kernels, the latest being 2.4.5-ac12. This is what I know:
[DMESG]
isapnp: Scanning for PnP cards...
isapnp: Calling quirk for 01:00
isapnp: SB audio device quirk - increasing port range
isapnp: Card 'Creative SB16 PnP'
isapnp: 1 Plug & Play card detected total}modprobe sb
/lib/modules/2.4.5-ac12/kernel/drivers/sound/sb.o:init_module: No such device/lib/modules/2.4.5-ac12/kernel/drivers/sound/sb.o: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters/lib/modules/2.4.5-ac12/kernel/drivers/sound/sb.o: insmod/lib/modules/2.4.5-ac12/kernel/drivers/sound/sb.ofailed/lib/modules/2.4.5-ac12/kernel/drivers/sound/sb.o: insmod sb failed[
/etc/modules.conf]
options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330[DMESG}
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: No ISAPnP cards found, trying standard ones...
sb: dsp reset failed.So it seems that PnP finds the card, but the connections (or even the forced values) to the sb module fail. Back when this was a single processor machine, but still running 2.4 kernel, a windoze installation found the SB at the listed interface parameters.
Anyone have a solution?
Same problem without modules.conf settings, valid version of mod utilities, a web search did not help,...