Skip to contentSkip to conversation

Again: Linux 2.4.x and AMD Athlon

DISCUSSION Thomas Foerster 4 participants 4 messages Jul 12, 2001 – Jul 13, 2001

lore
Share & tools
lore
#0 lore raw

Hi folks,

i've upgraded from an AMD Athlon 650 to this system :

AMD Athlon 1,3 GHz, 266 FSB
2*128 MB Kingston SDRAM PC133
Epox 8KTA3+ (VIA KT133A, via686b Southbridge)
Linux 2.4.5-ac27

(Powersupply is 400 Watt, Video is handled by GeForce2 GTS 32 MB)

Compiling the kernel works great, fast and stable. Whenever there is high load on the systembus (e.g. compiling some source) the noise of my powersupply fans increase. (Not under Windows, so i think linux makes much more use of the power of AMD's CPUs)

I ran memtest86 for hours without any problems, i couldn't crash the system or any process.. until i start X 4.0.3.

I've tested it with KDE2 and Gnome 1.2. After a (mostly) successful start of one of the windowmanagers, most applications crush whenever i open them.
Running console-applications in xterm or compiling the kernel in xterm works still stable, but working with X11 apps is no more fun ... crashes all over ... (segfaults, sig 11)

This message is meant to be a better approach in solving the problem(s) with AMD Athlons/Durons.

I didn't overclock anything. Compiling the kernel with K6-2 Support or PIII fixes the problems (and the noise of the power-fan stays constant, so i think the cpu-power isn't used to the max :) )

I've monitored my system using lm_sensors and didn't get any unusual high or low values (cpu is about 42°)

Seems to be the problem with the AMD optimazion in the kernel.

Thomas

#1 lore raw
Quoted 1 line

Seems to be the problem with the AMD optimazion in the kernel.

We believe its a VIA chipset problem. Don't expect anything to happen on this front

#2 lore raw
In reply to Thomas Foerster
Quoted 1 line · Thomas Foerster

Seems to be the problem with the AMD optimazion in the kernel.

This sounds like a hardware problem -- none of the Athlons I'm using experience such problems, but then I'm using boards with AMD, ALi and SiS chipsets, but no VIA. Try updating your BIOS and making your memory settings more conservative. If that doesn't help, I suggest replacing your motherboard.

-ben

#3 lore raw
In reply to Thomas Foerster

Hi!

Am Donnerstag, 12. Juli 2001 09:15 schrieb Thomas Foerster:

Quoted 8 lines

AMD Athlon 1,3 GHz, 266 FSB
2*128 MB Kingston SDRAM PC133
Epox 8KTA3+ (VIA KT133A, via686b Southbridge)
Linux 2.4.5-ac27
(Powersupply is 400 Watt, Video is handled by GeForce2 GTS 32 MB)
...
I've monitored my system using lm_sensors and didn't get any unusual high or low values (cpu is about 42°)

You mentioned, you've got a 400W power supply. But this does not mean you have enough (available) current on the 3.3V and 5V lines. Or perhaps your Core voltage is dropping very hard every time your "monster" graphics card draws a lot of current. Perhaps you should check that (partly possible via lm_sensors).

I also use a 400W supply with a TB1.4 GHz and I can see a drop on the 3.3V lines every time I start X on a GeForce 2MX...

Salut, Jörg