Skip to contentSkip to conversation

3-order allocation failed

DISCUSSION Dagfinn Ilmari Mannsåker 1 participant 1 message Jul 23, 2001

lore
Share & tools
lore
#0 lore raw

My computer is serving stuff via Apache over an ssh tunnel. Since 2.4.5-ac-something (I thint it was -ac5, not quite sure), I've been getting lots of these messages in the kernel log (up to 1200/min, less with later kernels, it seems):

Jul 23 21:06:01 ilm kernel: __alloc_pages: 3-order allocation failed.

This only occurs when there has been considerable traffic (over 200kB/s) for some time, and only when it's Apache over SSH. I can push >800kB/s for hours with samba without getting these messages. I haven't tried apache without SSH, but I'll try that tomoroow.
The data is being served from a 36GB ReiserFS sw-raid0 array on 2 UltraWide SCSI drives on a Tekram 390F controller.

I'm currently using a RealTek 8139 NIC (8139too driver); but it also occured with a RealTek 8029 (ne2k-pci).

When this occurs, transfers stall after a few hundred kilobytes (but directory indices and small documents work just fine), and X programs are unable to connect to the X server. As soon as I stop the transfers, everything is OK.

Some system information:
Linux version 2.4.7 ([email protected]) (gcc version 2.95.4 20010703 (Debian prerelease)) #2 Sat Jul 21 19:03:00 CEST 2001

Relevant devices:
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at e400 [size=32]

00:0d.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 26)
Subsystem: Tekram Technology Co.,Ltd. DC390F Ultra Wide SCSI Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4250ns min, 16000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at db004000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at db005000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Kingston Technologies EtheRx
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at ec00 [size=256]
Region 1: Memory at db006000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Related packages:

ii  gcc       2.95.4-4  The GNU C compiler.
ii  libc6     2.2.3-7   GNU C Library: Shared libraries and Timezone data
ii  apache    1.3.20-1  Versatile, high-performance HTTP server
ii  ssh       2.9p2-4   Secure rlogin/rsh/rcp replacement (OpenSSH)
ii  samba     2.2.1a-1  A LanManager like file and printer server for Unix.
Signature · 3 lines
Dagfinn I. Mannsåker
GPG Public Key ID: 0x51ECFAC6
Fingerprint:  48BB A64D CE9B 9A06 65DF  395C D42E CDC4 51EC FAC6